When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The next group of parts came in this morning, I'm opting to have everything new in the rear. The gears should be here tomorrow, and the axles are the middle of next week.
I still have to call DSS or PST for a driveshaft, has anyone do the strange 1350 flange know the specs for it, going to a t-56? Wouldn't one for a 12 bolt fit?
The axles came in to day, they look to be great quality and the customer service was excellent!! I now have all the parts to put this bad boy together, just need to find the time to get on it.
Unfortunately not yet, i have been so busy with the job change and with the end of the school semester, plus i'm going out of the country for the next week. But plans are to start next on it the first week in December. I need to get a new fuel pump and order C Clip eliminators for the rear.
I like them a lot. I think I've finally got the compression and rebound adjusted to my liking and driving style. The cool thing about these coilovers is you have the ability to adjust ride height, as well as get the car setup for street driving, street racing, autocross, track events, etc. Install was pretty easy as well.
I got the car running again it needed a new fuel pump and injector clips. I ordered up a set of front tires for the car and got those put on today. I must say for never driving a car with skinnies before it's really not all bad, the steering has a lighter feel and you Know there are up there but it's totally manageable. Also to my amazement the ABS light did not come on Being that I have 26in/28in tire combo.
Last edited by 95sscamaro; 01-19-2016 at 05:02 PM.
Wow, this is starting to get more and more tempting! What would a guy need to do to keep his 1LE driveshaft?
Also curious if anyone has used a spool or had c clip eliminates installed?
Last edited by Vicious95Z28; 12-24-2015 at 10:19 PM.
Wow, this is starting to get more and more tempting! What would a guy need to do to keep his 1LE driveshaft?
Also curious if anyone has used a spool or had c clip eliminates installed?
I'm pretty sure all you would need to keep your DS is just the conversion u joint, and the rear flange of the ford DS. Wouldn't see a problem using a spool, and from what I could find no one makes a direct bolt in c clip eliminator setup for the fbody 10 bolts.