Moser or Strange
#1
Teching In
Thread Starter
Join Date: Nov 2001
Location: Alaska
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Moser or Strange
I'm looking at going with a 12 bolt this summer and would like your opinions and pro's and con's on the two aforementioned rear axles. thanks
#2
On The Tree
Join Date: Nov 2001
Location: Detroit, MI
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Re: Moser or Strange
#3
TECH Resident
Join Date: Nov 2001
Location: Houston, Tx
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
Re: Moser or Strange
I have heard nothing but good things about Moser. You should go to the site and e-mail him. I asked him a page full of questions and he had them all answered by the next morning. <img src="images/icons/shocked.gif" border="0">
Marty
Marty
#4
TECH Enthusiast
#7
Re: Moser or Strange
Just as an FYI: Both Moser 9" I've been privvy to installation required modification to the center section. Haven't seen their 12bolt yet.
ChasGiv3 was looking into a Mark Williams 12bolt, but scrapped the idea when they made the assumption that he'd have readily available access to a machine shop (not really plug and play) but he could comment more on the details.
I will prolly go with the Strange, mainly because they are local for me.
- Joe
ChasGiv3 was looking into a Mark Williams 12bolt, but scrapped the idea when they made the assumption that he'd have readily available access to a machine shop (not really plug and play) but he could comment more on the details.
I will prolly go with the Strange, mainly because they are local for me.
- Joe
Trending Topics
#8
TECH Fanatic
Join Date: Nov 2001
Location: Holly Springs NC
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
Re: Moser or Strange
My boyfriend got his Moser 12bolt w/ 4.11's/Eaton posi and has the left side axle going back to Moser....the splines on the axle are twisted. <img src="images/icons/frown.gif" border="0">
Moser said they never saw one twist, but bend yes. Thing is he only has 370 RWHP and we think maybe it was defective from the get go, it's only been on the car 2 months.
But, Moser is good and I think Stange is as well. Coming from my b/f being a racing/mechanic he chose Moser. <img src="images/icons/smile.gif" border="0">
WE hope it's just a defect, or was not hardened properly, cannot wait til the car is back up again, soon!!
<img src="images/icons/smile.gif" border="0">
Moser said they never saw one twist, but bend yes. Thing is he only has 370 RWHP and we think maybe it was defective from the get go, it's only been on the car 2 months.
But, Moser is good and I think Stange is as well. Coming from my b/f being a racing/mechanic he chose Moser. <img src="images/icons/smile.gif" border="0">
WE hope it's just a defect, or was not hardened properly, cannot wait til the car is back up again, soon!!
<img src="images/icons/smile.gif" border="0">
#10
TECH Fanatic
Join Date: Nov 2001
Location: Katy, TX
Posts: 1,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: Moser or Strange
[quote]Originally posted by Big Mike:
<strong>I love my Moser. I received it right away, looks good, strong as hell and its quiet!!</strong><hr></blockquote>
ditto Big Mike!
<strong>I love my Moser. I received it right away, looks good, strong as hell and its quiet!!</strong><hr></blockquote>
ditto Big Mike!
#14
Staging Lane
Join Date: Nov 2001
Location: Southlake, TX
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Re: Moser or Strange
Moser 12-bolt. Great build quality and only slightly noiser than the 10-bolt. The only negative comment I have is it would be nice to have had all the hardware included.
-Allen
-Allen
#15
TECH Senior Member
iTrader: (6)
Re: Moser or Strange
[quote]Originally posted by Joe99SS:
<strong>What gear did you go with John? Any install issues or is it strictly a plug and play type thing?</strong><hr></blockquote>
Yep! Only thing I had to do was move my brakes over to it. Alignment was perfect, I was a little worried that it would be off... didn't want the 315's to hit <img src="images/icons/wink.gif" border="0">
It had everything but paint.. still haven't figured out why they don't paint them.
<strong>What gear did you go with John? Any install issues or is it strictly a plug and play type thing?</strong><hr></blockquote>
Yep! Only thing I had to do was move my brakes over to it. Alignment was perfect, I was a little worried that it would be off... didn't want the 315's to hit <img src="images/icons/wink.gif" border="0">
It had everything but paint.. still haven't figured out why they don't paint them.
#16
TECH Apprentice
Join Date: Nov 2001
Location: Fort Worth
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Re: Moser or Strange
My Moser 12 bolt is noisy.I need an adj.PHB to center the rear end.Drivers side sits 3/4" taller than pass.side.The pinion seal leaks,too.Installed May 2001.No street racing and has made 6 1/4 passes at the track.