Paging Colonel
Thread Starter
TECH Fanatic
Joined: Nov 2001
Posts: 1,055
Likes: 0
From: Chi-Town
Paging Colonel hey i have a question for you:
you have a random adjustable torque arm and have previously stated that it is nice and quiet because it is still in the stock location...
WELL
the 64,000 question is how did you keep it in the "stock" location with a TH350?
thanks
-and if you have any pics that'd be great <img src="gr_stretch.gif" border="0">
you have a random adjustable torque arm and have previously stated that it is nice and quiet because it is still in the stock location...
WELL
the 64,000 question is how did you keep it in the "stock" location with a TH350?
thanks
-and if you have any pics that'd be great <img src="gr_stretch.gif" border="0">
Re: Paging Colonel M.R. is correct!
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
TECH Senior Member
Joined: Nov 2001
Posts: 9,246
Likes: 3
From: Troy, AL
Re: Paging Colonel "bushing in stock location kinda automatically makes it quiet"
No, again, it really has NOTHING to do with the fact that the bushing is in the stock location but rather that the material that the bushing is made of is SOFT (not as soft as the stock bushing but still, pretty soft compared to what it could be.) Make it a solid bushing in the stock location and I'd bet it'd be noisy. By contrast, take this soft bushing that it has and move it forward, backwards, up, or down and it would still be quiet. <img src="gr_stretch.gif" border="0">
No, again, it really has NOTHING to do with the fact that the bushing is in the stock location but rather that the material that the bushing is made of is SOFT (not as soft as the stock bushing but still, pretty soft compared to what it could be.) Make it a solid bushing in the stock location and I'd bet it'd be noisy. By contrast, take this soft bushing that it has and move it forward, backwards, up, or down and it would still be quiet. <img src="gr_stretch.gif" border="0">
TECH Senior Member
Joined: Nov 2001
Posts: 9,246
Likes: 3
From: Troy, AL
Re: Paging Colonel That's right!
BTW, I never stated that it was quiet because it is still in the stock location. It's quiet because of the bushing that it uses. <img src="gr_stretch.gif" border="0">
BTW, I never stated that it was quiet because it is still in the stock location. It's quiet because of the bushing that it uses. <img src="gr_stretch.gif" border="0">
Thread Starter
TECH Fanatic
Joined: Nov 2001
Posts: 1,055
Likes: 0
From: Chi-Town
Re: Paging Colonel well that is what i meant....
bushing in stock location kinda automatically makes it quiet
any pics?
curious to see how it mounts....i'll go check out yanks site to see if i can see anything
thanks
bushing in stock location kinda automatically makes it quiet
any pics?
curious to see how it mounts....i'll go check out yanks site to see if i can see anything
thanks
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Fanatic
Joined: Nov 2001
Posts: 1,055
Likes: 0
From: Chi-Town
Re: Paging Colonel [quote]Originally posted by Matt98SS:
<strong>i have a TQ arm in stock location with my TH400 too. I don't have the Yank kit but get a hardcore hotrodder to play install man and it becomes easy</strong><hr></blockquote>
oh so you mean like someone like me? <img src="gr_images/icons/wink.gif" border="0">
Accel makes a kit for $100 but i think i could make my own if i really took the time..we'll see
<strong>i have a TQ arm in stock location with my TH400 too. I don't have the Yank kit but get a hardcore hotrodder to play install man and it becomes easy</strong><hr></blockquote>
oh so you mean like someone like me? <img src="gr_images/icons/wink.gif" border="0">
Accel makes a kit for $100 but i think i could make my own if i really took the time..we'll see