98TADRIVER

iTrader: (36)

yeah PM me too

93formto98T/A

iTrader: (28)

TTT. Where's this 9" Torque arm adaptor bracket????

Valkyn

iTrader: (8)

I did a google search and this is one thing i found.



Not sure what it bolts onto or how well it holds up or if they even still make it.

link to the website is http://autoweldchassis.com/vbi.ivnu

Pro Stock John

iTrader: (34)

If that rearend is for a 3rd gen, you will need 3rd gen offset wheels from now on. So if you ran a 15x10 Draglite, you would need a 6.5 not a regular 7.5.

98TADRIVER

iTrader: (36)

i c

wow i cant believe all of this input!!! i appreciate everyone giving me their $.02

MrDude_1

iTrader: (4)

will it bolt up? yes

only real diff would be the offset of the rims....that axle is roughtly 1.5" shorter then your current one.

heh, ive swapped back and forth between 3rdgen and 4thgen axles several times.... right now im running a "LT1" rear...

all the suspension pickup points are identical, only the width is diffrent.


i donno about that unique TQ arm delete thing though... id buy that rear, but use normal LCAs and one of SEVERAL 9" TQ arm mounts out there....

BigKap94z

iTrader: (47)

Sorry fellas, I haven't checked this thread lately. Yes there is the one posted from Auto-weld chassis, which looks nice because it makes your factory torque arm bracket adjustable if your using it. Also Currie enterprises also offers one as well. The currie one is a weld on setup i believe.

Valkyn

iTrader: (8)

I wish you guys in the know would let the rest of us in on where to get these.

MrDude_1

iTrader: (4)

call currie or call strange or call PA racing or google it online and wade thru the results to find several of the smaller companies doing it. Moser usually wont sell their TQ arm mount separately, but everyone else does.

most of the better ones dont just bolt on. they have tubes, regular, easy to fab tubes, that are welded to the housing, just next to the centersection bolt ring. the bracket then bolts to it.

98TADRIVER

iTrader: (36)

cool, so it is possible to swap then.. i emailed moser about the axles and housing ends and trq arm mount. heres what they said


We can sell you new axles with the exciter rings installed. I do not sell the torque arm brackets independently (only mounted to my housing).
The axles with bearings, studs and new exciter rings will be; $590.00
New housing ends are $80.00.
I do not have caliper brackets your stock brackets will work.
We can sell you new axles with the exciter rings installed. I do not sell the torque arm brackets independently (only mounted to my housing).