DANSBIRD

iTrader: (2)

What's the time frame from ordering to shipping a fully assembled rear end?

I've got 2 toys as a DD.. my T/A and my Jeep. Neither of which I like to rely on solely for any real length of time. haha.

DANSBIRD

iTrader: (2)

I'm a little fuzzy on some of the options. A friend helped clear some things up, but I am still not sure about others and what I need and don't need for my application. If there's someone at MWC that is patient & up for helping me make some sense out of all of this, I'd appreciate it.

you can shoot me a PM so it doesn't clog up this thread.

MidwestChassis

iTrader: (5)

Give me a call at the shop when it is convenient for you.

DANSBIRD

iTrader: (2)

Will do... who am I asking for?

MidwestChassis

iTrader: (5)

Ask for Kevin I will more than likely be the one answering the phone.

DANSBIRD

iTrader: (2)

Sounds good. I'll try to give you a call tomorrow. Thanks.

RikkiTorment

Kevin helped me out, he was very knowledgeable and patient with elaborating what would give me the best driving experience for my car without overselling me on **** I didn't need.

Patsy57

iTrader: (37)

Any pics of the abs retrofit kit?

MidwestChassis

iTrader: (5)

I am not sure if we do or not I will have to look and see.

MidwestChassis2

iTrader: (1)

If you have any questions about the best rear end on the market please give us a call and we will be more than happy to answer all your questions. (309)382-6252

Or check out our web site filled with thousands of items to choose from including rear ends. If you do not see it on our web site we probably still offer it and have not yet got to listing it on the web site. So please give us a try first on all your automotive needs.
Midwest Chassis Web Site

MidwestChassis2

iTrader: (1)

Always two available lines if needing to talk to a salesperson during business hours. (309)382-6252 or (309)583-0199 and we will be more than happy to answer all your questions when you call.

Have a great weekend and Midwest Chassis wants to thank all our devoted customers.

MidwestChassis2

iTrader: (1)

It has been the craziest year to date for Midwest Chassis Fabricated Rearends for the F-Body platform. We have one fabricator that all he does every day all day is just build F-Body fabricated rear end housings to fulfill orders.

We have always had a dedicated rearend fabricator but they also manufactured other items such as the torque arms and crossmembers. For a little over a year now all he does is build fabricated nine inches and like mentioning just for the F-Body platform as we still build other applications but he builds them everyday just to fulfill the constant flow of incoming orders for the F-Body.

The same can be said for our front suspension, we now have a dedicated F-Body K-member fabricator. He builds nothing but F-Body K-members everyday all day.

We want to thank the F-Body community for all the support they have given us over the years especially here on LS1Tech where it all started and want to continue to grow with this community by offering great product and support. Then again we can understand the popularity of our items as we always try to go the extra mile to make fit, finish, and installation go as smooth as possible. Most of that comes from the fact we constantly do installs on our own product here in the shop. This is why our fabricated nine inch bolts back in the same way a 10-bolt comes out and no one else offers that.

Thank You- Midwest Chassis & Staff.

LASTLS1

iTrader: (7)

Don't forget those customers who push-abuse your products on the track!!! Always holding up!!! Thanks for the great product and going the extra mile!!!!!

DANSBIRD

iTrader: (2)

I hope to be ordering one here shortly, as well.

DANSBIRD

iTrader: (2)

MWC... What driveshaft would you recommend for your Fab 9"? It's just a street car w/ minimal track use, so it doesn't have to be the lightest DS out there. Not concerned w/ weight savings... just strength/support.

BTW... it's an 02 TA w/ an M6.

MidwestChassis2

iTrader: (1)

How much HP?

DANSBIRD

iTrader: (2)

460rwhp/420rwtq

MidwestChassis2

iTrader: (1)

This would be a good option at that level.
PST3" W/ T-56 Specific Yoke

DANSBIRD

iTrader: (2)

Thanks. I'm trying to ballpark what it's going to run me to get a Fab 9" + the driveshaft. That helps things out a bit.

MidwestChassis2

iTrader: (1)

Not a problem and remember we do still offer the layaway program with all of our products. It has been helping customers get the rearend of their dreams for almost ten years when we started it. This way you don't have to settle for the lesser quality rearends available on the market.