What to do to make my LS1 louder?
10-18-2008 | 05:59 PM
#4
Anything actually done to the car besides the catback exhaust?? Stock engine don't have much rumble as far as exhaust pulse sound..Cam, long tube headers, off road y-pipe..That is about as good as it gets for a start
10-18-2008 | 06:19 PM
#7
I have Pacesetter Long tubes, ORY and Magnaflow catback. It sounds good, get headers and the ory or a 3" catted y pipe if they do emissions where you are.
Cam will add even more noise, even with just headers it sounds good though.
Cam will add even more noise, even with just headers it sounds good though.
Trending Topics
10-18-2008 | 06:46 PM
#8
Well from what ive heard, Magnaflow system's arent very loud on a stock ls1. When you slap some LongTubes, it really wakes it up. Get yourself some LT's, ORY & Cutout or switch your magnaflow out for a SLP LoudMouth 2 system.
My exhaust was pretty damn good, with the LoudMouth 2 muffler. Car was lightly modded with a Ram Air Kit, Lid & Ported TB. Used to have a Flowmaster Catback before that. The LM2 was louder....
My exhaust was pretty damn good, with the LoudMouth 2 muffler. Car was lightly modded with a Ram Air Kit, Lid & Ported TB. Used to have a Flowmaster Catback before that. The LM2 was louder....
10-18-2008 | 06:56 PM
#10
my magnaflow with headers and ory was so quiet that i had to get a cut-out lol...and no u need more to go with a cam, such as springs pushrods, timeing chain and an oil pump is what i would do along with a cam swap....also a tune!
10-18-2008 | 11:37 PM
#17
Mine has a flowmaster cb on it and a cutout. The flowmaster is nice and rumbly, but not very loud. With the cutout off though, jesus that thing gets loud. I would do headers, the ory and a cutout. As soon as I get my headers, I am going to open my cutout and rev the hell out of it. I am gonna try to get a sound clip posted up so people can tell me what they think.
