Post your 2009 *To-Do List*
#105
TECH Enthusiast
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
HAHAHAHA!!!! I got a long list!!!!
Re-paint the car & under the hood
Full suspension including new Tubular K member and A arms
Redo interior
New Sound System
Tint side windows
454i LSx Stroker
D1 or F1a Procharger Kit
Cor 19" Wheels
CME
True Duals w. X pipe
Moser 9" w/ 4.11 Gears
Tick Performance Built T56
Short Shifter
Textrailia Clutch
Fast Lsx Intake and TB 92mm w/ a few tricks
White face guages
A pillar guages for boost & fuel pressure and AF ratio
All Blue int Lights and Guage lights
Polished 6 pt roll cage
Get vanity plates
800-1000 RWHP
Be on the cover of a magazine
And I think that's MOST of it.... def not all though and that's just for the Camaro
Re-paint the car & under the hood
Full suspension including new Tubular K member and A arms
Redo interior
New Sound System
Tint side windows
454i LSx Stroker
D1 or F1a Procharger Kit
Cor 19" Wheels
CME
True Duals w. X pipe
Moser 9" w/ 4.11 Gears
Tick Performance Built T56
Short Shifter
Textrailia Clutch
Fast Lsx Intake and TB 92mm w/ a few tricks
White face guages
A pillar guages for boost & fuel pressure and AF ratio
All Blue int Lights and Guage lights
Polished 6 pt roll cage
Get vanity plates
800-1000 RWHP
Be on the cover of a magazine
And I think that's MOST of it.... def not all though and that's just for the Camaro
#106
TECH Fanatic
iTrader: (20)
Join Date: Oct 2008
Location: Plano, IL
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
To do list:
LE2 cylinder heads
Ported intake manifold
pacesetter lt's
2 hooker aerochamber mufflers
summit x-pipe kit
new tires
sfc's , rear control arms with relocation brackets
new hood
slotted rotors & brake pads
30# injectors
dyno and run the car at track
find a new job and most importantly get out more and have some fun !
LE2 cylinder heads
Ported intake manifold
pacesetter lt's
2 hooker aerochamber mufflers
summit x-pipe kit
new tires
sfc's , rear control arms with relocation brackets
new hood
slotted rotors & brake pads
30# injectors
dyno and run the car at track
find a new job and most importantly get out more and have some fun !
#108
TECH Fanatic
iTrader: (73)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Wow ..where to start
ENGINE
-Racetronix/Walbro Kit
-Lucas 36lb injectors
-Vengeance Ported FAST 92/92
-Patrick G custom grind (hopefully w/in range of my 7.400 PR's so my valvetrain won't be SO DAMN NOISY!!)
-U/D pulley install (after 1 1/2 yrs!!
)
-LS6 ported oil pump during cam swap
-SLP/z06/truck 85mm MAF
-FTP 85mm Lid
-POSSIBLY- PRC 5.3 stg 2.5s to go along w/ Pat G cam
DRIVETRAIN
-Strange 60/9 inch rear w/ 4.10's
-Ram HD clutch w/ upgraded flywheel
APPEARANCE
-Possibly repaint (white or SOM), black is KILLING me!
-CCW 505a's (18x9, 18x11)
SUSPENSION
-UMI/BMR LCA's
-UMI/BMR Adj TA
M/T ETs <--not suspension but my 60fts SUCK so they're included!!![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
MISC
-Fix my damn WINDOW MOTORS!!
-New antenna that WORKS..possibly a fixed mast.
ENGINE
-Racetronix/Walbro Kit
-Lucas 36lb injectors
-Vengeance Ported FAST 92/92
-Patrick G custom grind (hopefully w/in range of my 7.400 PR's so my valvetrain won't be SO DAMN NOISY!!)
-U/D pulley install (after 1 1/2 yrs!!
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
-LS6 ported oil pump during cam swap
-SLP/z06/truck 85mm MAF
-FTP 85mm Lid
-POSSIBLY- PRC 5.3 stg 2.5s to go along w/ Pat G cam
DRIVETRAIN
-Strange 60/9 inch rear w/ 4.10's
-Ram HD clutch w/ upgraded flywheel
APPEARANCE
-Possibly repaint (white or SOM), black is KILLING me!
-CCW 505a's (18x9, 18x11)
SUSPENSION
-UMI/BMR LCA's
-UMI/BMR Adj TA
M/T ETs <--not suspension but my 60fts SUCK so they're included!!
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
MISC
-Fix my damn WINDOW MOTORS!!
-New antenna that WORKS..possibly a fixed mast.
Last edited by '02 WS6; 12-17-2008 at 10:45 PM.
#110
Staging Lane
Join Date: Jul 2007
Location: Las Vegas, NV
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Fix:
-Dash switches (can't turn the heat/ac on)
-Headlight motors (more like get them in sync)
-Replace window motors (both are getting slow)
-Fix power antenna (won't operate anymore, period)
-Replace speakers
Mods:
-Kooks LTH
-SLP ORY
-SLP LM1 resonator (have LM2 now, a little too quiet)
-Brembo rotors/Hawk pads
-Intake manifold/TB
I have more in mind but I'd be satsified with that at least right now lol.
-Dash switches (can't turn the heat/ac on)
-Headlight motors (more like get them in sync)
-Replace window motors (both are getting slow)
-Fix power antenna (won't operate anymore, period)
-Replace speakers
Mods:
-Kooks LTH
-SLP ORY
-SLP LM1 resonator (have LM2 now, a little too quiet)
-Brembo rotors/Hawk pads
-Intake manifold/TB
I have more in mind but I'd be satsified with that at least right now lol.
#111
TECH Veteran
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Need to buy a few more things to finish up my 99 hopefully this season.
1. Lonnies double intank fuel system
2. stage 5 flt 4l80e conversion
3. yank py 3400e stall
4. strange s60 3.54 gears.
5. torque thrust m chrome wheels and some 315 nittos or et street radials or m and h street radials.
6. 3bar tuning.
Then after that hopefully ais alc injection and zex direct port nitrous.Possibly racelogic traction control system .
Possibly some stripes.
Possibly upgrade my turbos to a bit more airflow potential as well.
And have some stuff to install ,interceptor gauges, eboost2, some stereo stuff ,new bmr adjustable torque arm,lingenfelter 2 step,new turbosmart supersonic blow offs.
1. Lonnies double intank fuel system
2. stage 5 flt 4l80e conversion
3. yank py 3400e stall
4. strange s60 3.54 gears.
5. torque thrust m chrome wheels and some 315 nittos or et street radials or m and h street radials.
6. 3bar tuning.
Then after that hopefully ais alc injection and zex direct port nitrous.Possibly racelogic traction control system .
Possibly some stripes.
Possibly upgrade my turbos to a bit more airflow potential as well.
And have some stuff to install ,interceptor gauges, eboost2, some stereo stuff ,new bmr adjustable torque arm,lingenfelter 2 step,new turbosmart supersonic blow offs.
#112
TECH Enthusiast
iTrader: (3)
Join Date: Nov 2008
Location: Kansas
Posts: 640
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Start with the winter mods first...
1. Berger Panel with stainless inserts
2. Repaint wheels all black, red calipers
3. Paint valve covers and Intake Manifold
4. Yank off all the EGR/AIR bullshit
5. Weld on LCA's
6. Long Tubes
7. Buff paint
And for the rest of the year...
1. 3600 Stall, with shift kit and B&M trans cooler
2. Dyno tune at Dynojet in Lincoln, Ne
3. staggered 17x9 and 18x10 black TTM or Sportmax 962's
4. Nitto 305 DR's in the back
5. LS6 manfold
6. Ported TB
7. Possibly ported/polished LS6 heads
8. MS4
1. Berger Panel with stainless inserts
2. Repaint wheels all black, red calipers
3. Paint valve covers and Intake Manifold
4. Yank off all the EGR/AIR bullshit
5. Weld on LCA's
6. Long Tubes
7. Buff paint
And for the rest of the year...
1. 3600 Stall, with shift kit and B&M trans cooler
2. Dyno tune at Dynojet in Lincoln, Ne
3. staggered 17x9 and 18x10 black TTM or Sportmax 962's
4. Nitto 305 DR's in the back
5. LS6 manfold
6. Ported TB
7. Possibly ported/polished LS6 heads
8. MS4
#114
12 Second Club
iTrader: (8)
Join Date: Dec 2007
Location: Wilkes-barre
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
- Yank 3600
- Tune
- Drag Radials
- Dry Kit
- Cut Springs
- Adjustable Panhard
- Cheap Cosmetics
Things like a Berger panel, wet sanding my headlights, clear corners, brighter bulbs and whatever else I can conjure up. I also might swap rear ends if I can find a used 3.42 piece for the low low. Might end up selling the Z06s and getting a pair of 17x11 ZR1s to go with the ones I got in the closet.
As far as fixing her up goes, getting all the lights working, replacing the passenger window motor, and finding a new AC condenser should do the trick.
- Tune
- Drag Radials
- Dry Kit
- Cut Springs
- Adjustable Panhard
- Cheap Cosmetics
Things like a Berger panel, wet sanding my headlights, clear corners, brighter bulbs and whatever else I can conjure up. I also might swap rear ends if I can find a used 3.42 piece for the low low. Might end up selling the Z06s and getting a pair of 17x11 ZR1s to go with the ones I got in the closet.
As far as fixing her up goes, getting all the lights working, replacing the passenger window motor, and finding a new AC condenser should do the trick.
Last edited by RaggedRides; 12-20-2008 at 09:04 PM.
#116
Launching!
iTrader: (2)
Join Date: Mar 2005
Location: Lowell MA
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
During winter storage:
-full exterior/interior/underneath/engine detail
-plugs/wires/clean check valves (threw code over summer)
-moulding!/emblems!
-purchase oem ram air box/hood??maybe ws9??
-catch can
-underdrive pullies? ported t/b?
-pads/rotors/lines/fluid change
Springtime:
-new tires for my new rims (96-01 ws6 style)
-maybe take the koni's down one turn in stiffness up front
-drive the hell out of it.
-Finally get car to top speed..........
-full exterior/interior/underneath/engine detail
-plugs/wires/clean check valves (threw code over summer)
-moulding!/emblems!
-purchase oem ram air box/hood??maybe ws9??
-catch can
-underdrive pullies? ported t/b?
-pads/rotors/lines/fluid change
Springtime:
-new tires for my new rims (96-01 ws6 style)
-maybe take the koni's down one turn in stiffness up front
-drive the hell out of it.
-Finally get car to top speed..........
#117
Formerly darynC-10/23/10
iTrader: (19)
Join Date: Aug 2006
Location: gonzales louisiana
Posts: 2,301
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
10 pt cage,
fiberglass dash from vfn
tubs
ladderbars
coilovers
10 gallon plastic tank
barry grant fuel system
holley 1050 alky carb
super victor jr
bullet solid cam
bullet lifters
2 kirkley seats
greg weld wheels with 30x13x15 good years
sandblast and paint my 9''
glide/w 8 inch 5000 stall and a trans brake
quaterstick
new bumper cover ... hehe
new paint job
paint job
fiberglass dash from vfn
tubs
ladderbars
coilovers
10 gallon plastic tank
barry grant fuel system
holley 1050 alky carb
super victor jr
bullet solid cam
bullet lifters
2 kirkley seats
greg weld wheels with 30x13x15 good years
sandblast and paint my 9''
glide/w 8 inch 5000 stall and a trans brake
quaterstick
new bumper cover ... hehe
new paint job
paint job
#118
11 Second Club
iTrader: (13)
Join Date: Apr 2008
Location: From NorCal...Stationed in SoCal
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
![Cool](https://ls1tech.com/forums/images/icons/icon6.gif)
Black zr1 11's in there rear
pacesetter lt's and ts ory
15% tint all the way around
stealth box w/ jl audio 10''
and watever else i can afford after that...
pacesetter lt's and ts ory
15% tint all the way around
stealth box w/ jl audio 10''
and watever else i can afford after that...