Do you guys think a 226/226 .609/.600 110lsa cam is too big for a Dd T/A??
#41
TECH Regular
Now we all know that you don't have to change out your lifters when you change your cam (roller lifters only). But if it were me, and going thru all of the trouble of changing my cam, timing chain, pushrods for a little bit more and peace of mind I would change the lifters since you said they have 63k on them.
Lifters should be looked at before any cam change. Here is a link to Crane cams site on cams and lifters: http://www.cranecams.com/?show=reasonsForFailure
#42
TECH Fanatic
iTrader: (71)
My cam is a 226/232 .609/.604 113+2, its very streetable and made great power. The only thing I would worry about with that cam would be the 110lsa, that idle would pretty rough for a dd but that just depends on your preference.
And yes Iwould for sure change the lifters, LS7s will cost you just over $100, then buy some cometic head gaskets to lower your compression and make more power with that cam.
And yes Iwould for sure change the lifters, LS7s will cost you just over $100, then buy some cometic head gaskets to lower your compression and make more power with that cam.