weiand 142 on ls1??
#5
I don't think Weiand makes a lower intake to bolt that blower on an LS1. Also, if that's going on a F-body it would take some serious firewall modification for it to fit. What carb you plan on running on the top of it?
#6
fab up a plate that goes on the bottom side so you can have the blower mounted to the side of the engine. like where the ac is or something. the have fresh air coming in and boosted air coming out. run the piping like a centrivical supercharger. but that would be a lot of fabricating. you would have to make a mounting bracket for the blower. just an idea.
#7
ok thanks guys im just looking for ideas i do metal fabrication for a living so im not real worried about needing to fab anything. and i will need to research what carb to run any suggestions for that?
Trending Topics
#9
TECH Apprentice
iTrader: (5)
Joined: Dec 2007
Posts: 347
Likes: 0
From: Southern Colorado Front Range
fab up a plate that goes on the bottom side so you can have the blower mounted to the side of the engine. like where the ac is or something. the have fresh air coming in and boosted air coming out. run the piping like a centrivical supercharger. but that would be a lot of fabricating. you would have to make a mounting bracket for the blower. just an idea.