12 second stock camaro
#26
12 Second Club
iTrader: (3)
To be dead nuts honest the car isn't stock though... I would think any strong LS1 car could get similar numbers at Atco (with the DA they are known for having) with drag radials only. A great time with Drag Radials but 100% bone stock still belongs to Evan (I believe) with a 12.89 @ 108mph.
#31
12 Second Club
iTrader: (7)
Join Date: Apr 2006
Location: Long Island, NY
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
LS6 Intake FTMFW!!!
To be dead nuts honest the car isn't stock though... I would think any strong LS1 car could get similar numbers at Atco (with the DA they are known for having) with drag radials only. A great time with Drag Radials but 100% bone stock still belongs to Evan (I believe) with a 12.89 @ 108mph.
To be dead nuts honest the car isn't stock though... I would think any strong LS1 car could get similar numbers at Atco (with the DA they are known for having) with drag radials only. A great time with Drag Radials but 100% bone stock still belongs to Evan (I believe) with a 12.89 @ 108mph.
#32
12 Second Club
iTrader: (3)
Well several things changed but considering we have a less agressive cam I would say that an LS6 intake with a more agressive cam should yield very similar results (maybe better). Pending you use the same dyno (not all dynos are the same as most of us know).
Last edited by S8ER95Z; 12-10-2009 at 09:56 AM.
#33
12 Second Club
iTrader: (3)
What do you mean by this?? The car is 100% stock, I lent him my 275/40r17 m/t drag radials and thats what the car ran... I have run a 12.47 with the same tires and I am a header car thats it.... Atco on a cold day and shifting the **** out of your car will do wonders for your et.
I can only imagine how much of a difference in the 1/4 drag radials would have been for me over the 245/50 R16 RSAs that came on the car. A 1.8 or 1.9 60ft would have cut several tenths (dare I say half a second) off my time which I believe illustrates just how potent of a modification drag radials are.
#36
TECH Addict
iTrader: (11)
This is whats been said, but I have put many 1.8-1.9 60' passes on my 10 bolt on DRs. My 10 bolt isnt stock, just has 3.73s & new bearings but my motor isnt stock either so puttin more power to it as well. Some hold up for a while, some dont.
#38
TECH Fanatic
iTrader: (1)
Join Date: Jul 2006
Location: MPLS MN
Posts: 1,215
Likes: 0
Received 0 Likes
on
0 Posts
i sorry to be a doubting thomas, but your telling me STOCK, no air lid, no catback/exhaust, no tune, no improved suspension? was this an SS? w/ drag radials i could see 12.9 not 12.7. stock lid and muffler are very restrictive. oh well, cheers anyways.