DCC!!

iTrader: (8)

ok so im finally gona be startin my car soon after 8 months.

my block has been in my car with no heads or anything sittin under a covered carport for 8 months

every once and a while i would go out and take the tape off and WD40 EVERYTHING and turn the engine over a few times then retape and cover with a towle and blanket on top of that.

so my question is is there anything else i should do before i put my heads on a start putting this thing back together?

and after that what should i do to start it? do i just hook everythink up and turn key or what?

any help is great! thanks guys!

NDFORSPD

you could put the heads back on and slide a teaspoon or so of motor oil down the spark plug holes.

SOMbitch

iTrader: (8)

Make sure the bore is clean and free of rust, oil her back up and start wrenching.......

samson_420

iTrader: (1)

What he said. . . . . Just make sure the inside is clean.

DCC!!

iTrader: (8)

yeah thats pretty much what i was thinking what about starting it the first time when im ready to start it???
thanks btw

SOMbitch

iTrader: (8)

It wouldn't hurt to pull the fuel pump fuse and turn it over til the oil gets to the top end...

90TSiAWD

Change the oil! haha

DCC!!

iTrader: (8)

^^ haha