It's spring, what did you do to your F-body today?
#43
Staging Lane
Join Date: Dec 2010
Location: Pittsburgh area, PA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
changed the oil and the rear end fluid. last week got it inspected, change plugs, wires, air filter, greased everything.
Also tried to glue the door together again which didn't work. again.
tomorrow = swap meet time
Also tried to glue the door together again which didn't work. again.
tomorrow = swap meet time
#46
On The Tree
iTrader: (6)
Fiamm 72112, got from ebay for just over $10 shipped. This one has the same plug GM uses so its a direct swap. There are other ones out there that are one wire, and some that are 2 wire with spade terminals so keep an eye out. The horn sounds good, not louder than stock, but at least you dont have to be ashamed to use your horn now lol.
#48
#52
Teching In
iTrader: (2)
Join Date: Mar 2010
Location: El Paso, TX
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Got my C6 Z06 wheels installed with some Bridgestone tires
Lowered her 1.5" with Eibach Springs with KYB Shocks and Struts
Took apart all of my interior washed everthing with a pressure washer.
undercoated the entire floor pan
Installed some new 6.5" Pioneer speakers front and back
Ordered me some UMI and Edelbrock suspension goodies and more...
UMI Adjustable Panhard Bar
UMI Sway Bars
UMI Strut Bar
UMI Rear Lower Control Arms
Edelbrock Torque Arm
Richmond 3.73 Gears
Coming next month
BMR Tubular K-member
Hooker Super Comp. Long Tube Headers
I just finished washing her too
**383 LT1 Stroker Coming Summer of 2011***
Lowered her 1.5" with Eibach Springs with KYB Shocks and Struts
Took apart all of my interior washed everthing with a pressure washer.
undercoated the entire floor pan
Installed some new 6.5" Pioneer speakers front and back
Ordered me some UMI and Edelbrock suspension goodies and more...
UMI Adjustable Panhard Bar
UMI Sway Bars
UMI Strut Bar
UMI Rear Lower Control Arms
Edelbrock Torque Arm
Richmond 3.73 Gears
Coming next month
BMR Tubular K-member
Hooker Super Comp. Long Tube Headers
I just finished washing her too
**383 LT1 Stroker Coming Summer of 2011***
Last edited by Wicked_Z28; 03-27-2011 at 12:49 PM.
#54
Staging Lane
Join Date: Dec 2010
Location: Pittsburgh area, PA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
I'm in PA too, despite the 30 degree weather I've done a lot of tune up work in the driveway over the last few days and installed a panhard bar today. Last week I had the t-tops out.
but I wish it was warmer too, could get a lot more done.
but I wish it was warmer too, could get a lot more done.
#57
Teching In
iTrader: (3)
Join Date: Mar 2011
Location: Michigan
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Thankfully I now have a building to work in. It is a huge upgrade from my dirt driveway that was my former work space.
I've been working on repairing the slight body damage to my 02 Z28. It came from an insurance auction. Someone drove it through a fence. It won't be perfect but will be a fun street strip car when I'm done.
I've been working on repairing the slight body damage to my 02 Z28. It came from an insurance auction. Someone drove it through a fence. It won't be perfect but will be a fun street strip car when I'm done.
#60
TECH Junkie
iTrader: (17)
Join Date: Aug 2006
Location: Rapid City, SD
Posts: 3,161
Likes: 0
Received 0 Likes
on
0 Posts
Installed a ported stock TB, Pro 5.0 shifter, Tick master cylinder, Monster Stage 2 clutch package with lightweight flywheel. I'm ready for this thing to get broken in and rip through some gears!