Gordon0652

iTrader: (4)

In this passed thread my sheet metal intake was hitting my oil sensor. Intake needed to be moved back between 1/4-5/16".

https://ls1tech.com/forums/generatio...e-problem.html

Now heres the fix!
With external oil pressure gauge connection:



W/O extrenal oil pressure gauge connection:

Gordon0652

iTrader: (4)

The parts:



-Russell
640830: M16 x 1.5 to -6AN
-AeroQuip
FCM2241 / FBM2241: -06 x 16MMx1.5
FCM2978 / FBM2978: -06 x -06 90*
-(extrenal pressure gauge)
FCM2915 / FBM2915: -06 x -06
FCM2183 / FBM2183: A=-06 x B=-06 x C=1/8

I suggest making a support if you use the extrenal connection because the oil sensor is not the lightest...
This was all about 60$ with the external connection. I've seen some relocation with connection go for over 180$.

udienow

iTrader: (18)

i remember reading your old thread... congrats on the fix.

RsSean

iTrader: (27)

I am prolly going to relocate mine when I put my intake on. Thanks for the par numbers, Iam going to do a braided line off to the driver side with a external gauge as well.