Sierra Speed Shop Hi-Rise intake for LS1/LS2/LS6
#21
FormerVendor
Thread Starter
Join Date: Nov 2012
Location: Sacramento, CA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
#24
FormerVendor
Thread Starter
Join Date: Nov 2012
Location: Sacramento, CA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
If we have a local candidate, we may offer the opportunity for a stock engine comparison.
Thanks,
Kyle
#25
FormerVendor
Thread Starter
Join Date: Nov 2012
Location: Sacramento, CA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
#26
#30
FormerVendor
Thread Starter
Join Date: Nov 2012
Location: Sacramento, CA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Good new, the final piece of the puzzle is here!
Once all items are done and plotted design and drawings can move forward!
We are looking forward to working on this project as much as you are looking to the result. We will keep this thread updated as possible during development.
Thanks,
Kyle
#32
FormerVendor
Thread Starter
Join Date: Nov 2012
Location: Sacramento, CA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Always hard to estimate a price before any drawings or production costs have been estimated, but we are hoping to manufacture in the range of a FAST intake manifold, and offer this as a viable option for people looking for a high rise intake alternative.
Thanks,
Kyle
Thanks,
Kyle
#33
#34
FormerVendor
Thread Starter
Join Date: Nov 2012
Location: Sacramento, CA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
A CMM is a coordinate measuring machine. Specifically this measures points in a 3D axis. Using a CMM we can reverse engineer using factory mounting points to ensure we are making a good development part.
Specifically we are trying to eliminate error, an the guesswork in the manufacturing process. Luckily, between myself and my partner directly, we have over 30 years experience in the manufacturing industry.
We will also have fully digital models of the intake before we even begin to cut the first piece of metal. We will post limited pictures of this process, as we will be sure to get a patent for our design.
Thanks for following!
Kyle
Specifically we are trying to eliminate error, an the guesswork in the manufacturing process. Luckily, between myself and my partner directly, we have over 30 years experience in the manufacturing industry.
We will also have fully digital models of the intake before we even begin to cut the first piece of metal. We will post limited pictures of this process, as we will be sure to get a patent for our design.
Thanks for following!
Kyle