1200hp edelbrock Eforce/ LSX376
#1
Teching In
Thread Starter
Join Date: Jun 2018
Location: Houston/lousiana
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
1200hp edelbrock Eforce/ LSX376
I was told that 1200hp could be made with a b15 lsx376 & edelbrock eforce for 2013 Camaro...I'd like to know if this is possible from anyone's experience here & if so what would it take? I know that this can be achieved with turbos but this setup has already been purchased based on an actual performance shop owners statement that he can achieve 1200hp with 20-25lbs of boost with this particular setup...any knowledgable input is appreciated
#2
Restricted User
A few guys have made 1000 HP at the crank with the TVS2300. Its not an ideal scenario at all.
The heat generated at even 1000 HP is usually so high that its only done on the dyno, and with a large bag of ice sitting on top of the blower.
I'd say 1200 HP from the E-force is extremely unlikely.
The heat generated at even 1000 HP is usually so high that its only done on the dyno, and with a large bag of ice sitting on top of the blower.
I'd say 1200 HP from the E-force is extremely unlikely.
#3
Teching In
Thread Starter
Join Date: Jun 2018
Location: Houston/lousiana
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
A few guys have made 1000 HP at the crank with the TVS2300. Its not an ideal scenario at all.
The heat generated at even 1000 HP is usually so high that its only done on the dyno, and with a large bag of ice sitting on top of the blower.
I'd say 1200 HP from the E-force is extremely unlikely.
The heat generated at even 1000 HP is usually so high that its only done on the dyno, and with a large bag of ice sitting on top of the blower.
I'd say 1200 HP from the E-force is extremely unlikely.