View Poll Results: How much oil do you use?
None, and I beat the piss out of it
17
35.42%
0-1 qt per 3K, driving hard
14
29.17%
1-2 qt per 3K, driving hard
6
12.50%
0-1 qt per 3K, driving easy
6
12.50%
1-2 qt per 3K, driving easy
3
6.25%
2+ qts per 3K
2
4.17%
Voters: 48. You may not vote on this poll
Using Oil?
#21
TECH Apprentice
iTrader: (4)
Join Date: Oct 2005
Location: Southampton, MA
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Mine usually starts burning oil once the oil gets dirty. I keep track of my mileage but don't need to because like clockwork I start burning around 2-3K miles and just change it once I notice it burning.
#23
TECH Addict
iTrader: (3)
Join Date: Oct 2005
Location: SE VA
Posts: 2,255
Likes: 0
Received 0 Likes
on
0 Posts
Never had to add a drop of oil. I certainly don't do anything stupid with it, but I do run it when she's out. Of course, she's a weekender/summer car, with hardly 2000 miles a year, so unless you totally thrash it, I doubt it would leak anything anyway.
#25
TECH Fanatic
iTrader: (18)
Originally Posted by Josh McGrath
I get 250 -800 miles per quart! Doesnt mater what oil and not very little goes in my catch canI just changed my valve seals, and unless i did something wrong, that means its rings.
Smoking when I get it on it pretty bad doesnt matter what RPM especially in Neutral revving, what does that mean most likely rings?
Smoking when I get it on it pretty bad doesnt matter what RPM especially in Neutral revving, what does that mean most likely rings?
#27
TECH Addict
Originally Posted by Stanger88
Sorry for all the dang polls, but I want real-world info and not theory/heresay. I also dont think you have an oil usage database...(LS1 applicable only pls.)
Oil consumption happens with most internal combustion engines. But each individual engine is different. If the LS1 had any major issues it would not have been in produciton since 1997.
I know you are looking at buying an LS1, but seriously just because they blow a it of oil back thru the PCV system are you not going to buy one based off a poll where the results are less than scetchy.
I start my car I drive my car and I have fun in my car. If it needs oil when I check it I simply add some.
#28
Originally Posted by 300bhp/ton
Sorry but what is the point in this thread?
Oil consumption happens with most internal combustion engines. But each individual engine is different. If the LS1 had any major issues it would not have been in produciton since 1997.
I know you are looking at buying an LS1, but seriously just because they blow a it of oil back thru the PCV system are you not going to buy one based off a poll where the results are less than scetchy.
I start my car I drive my car and I have fun in my car. If it needs oil when I check it I simply add some.
Oil consumption happens with most internal combustion engines. But each individual engine is different. If the LS1 had any major issues it would not have been in produciton since 1997.
I know you are looking at buying an LS1, but seriously just because they blow a it of oil back thru the PCV system are you not going to buy one based off a poll where the results are less than scetchy.
I start my car I drive my car and I have fun in my car. If it needs oil when I check it I simply add some.
PCV sucking oil doesnt matter to me. I dont want a car blowing it out past the rings and I heard the low-tension oil rings gave issues in this car. If all these problems are just PCV related, I dont care. The motor is still tight if thats the case.
#29
11 Second Club
iTrader: (16)
Join Date: Feb 2006
Location: Cape Girardeau, MO
Posts: 1,865
Likes: 0
Received 0 Likes
on
0 Posts
I had mine burn through a quart one...not sure why but it was just one time other then that its not noticeable, and you could say i beat the **** out of it(but i do take care of it) and it still iddles around 50psi of pressure or more. LS1s are strong engines overall and most blowby in them would be a start up.
#30
Wow...I posted this same poll in the 4.6L mustang GT forum...seems LS1's just get bad press, the GT's use oil too...
If I understand right, 99% of all LS1 oil usage is due to the PCV system and NOT rings/valves?
What is this I hear of new ring design sometime in 01-02???
If I understand right, 99% of all LS1 oil usage is due to the PCV system and NOT rings/valves?
What is this I hear of new ring design sometime in 01-02???
#31
http://www.mustangforums.com/m_20375...tm.htm#2039211
Here is the oil-use for 4.6L GT's that I did on a mustang forum, so far as of NOW! 18% of the GT owners report over 1qt oil loss over 3K miles as opposed to 22% of the LS1 owners in the poll above that is now closed.
Here is the oil-use for 4.6L GT's that I did on a mustang forum, so far as of NOW! 18% of the GT owners report over 1qt oil loss over 3K miles as opposed to 22% of the LS1 owners in the poll above that is now closed.
#32
TECH Fanatic
iTrader: (18)
Originally Posted by Stanger88
http://www.mustangforums.com/m_20375...tm.htm#2039211
Here is the oil-use for 4.6L GT's that I did on a mustang forum, so far as of NOW! 18% of the GT owners report over 1qt oil loss over 3K miles as opposed to 22% of the LS1 owners in the poll above that is now closed.
Here is the oil-use for 4.6L GT's that I did on a mustang forum, so far as of NOW! 18% of the GT owners report over 1qt oil loss over 3K miles as opposed to 22% of the LS1 owners in the poll above that is now closed.