What does "CAM ONLY" mean to you?
#21
Originally Posted by rickyracer25
Or too poor to buy heads like me
I agree, but when someone says cam only, I usually figure: lid, descreened maf, cat back, and a tune. if you have like every bolt on then you shouldn't be claiming cam only, but a lid, cat back and a tune, those are normals. well and free mods.
#23
orangefun - that is not what most people think about cam only.
I won't cover it again as many people already have in this thread, but who gets a cam without full exhaust?? sounds about retarded to me...
I won't cover it again as many people already have in this thread, but who gets a cam without full exhaust?? sounds about retarded to me...
Last edited by jpat1023; 11-07-2006 at 04:05 PM.
#24
the term "Cam Only."
generally when someone gets to the point of installing a camshaft they have already done the prior mods i.e, full bolt-ons, weight savings, suspension work, gears, clutch etc..
imo its easier to focus on the things that " Cam Only " excludes:
1.) aftermarket heads / or porting of the stock heads.(does not include springs and pushrods)
2.) Nitrous.
3.) Turbo or Supercharger.
4.) aftermarket rotating assembly / ANY internal engine modifications / any block prep work.
i think the term "Cam Only" is well suited for its description.
when someone says, "yeah its a heads and cam car." you know what they mean without asking anything more. you know they have everything aside from a built motor and maybe aftermarket rear.
when someone says, "yeah its a cam only car." you know they mean they DO NOT have aftermarket heads or a built engine and maybe aftermarket rear.
all in all, the term cam-only fits well for its discription.
generally when someone gets to the point of installing a camshaft they have already done the prior mods i.e, full bolt-ons, weight savings, suspension work, gears, clutch etc..
imo its easier to focus on the things that " Cam Only " excludes:
1.) aftermarket heads / or porting of the stock heads.(does not include springs and pushrods)
2.) Nitrous.
3.) Turbo or Supercharger.
4.) aftermarket rotating assembly / ANY internal engine modifications / any block prep work.
i think the term "Cam Only" is well suited for its description.
when someone says, "yeah its a heads and cam car." you know what they mean without asking anything more. you know they have everything aside from a built motor and maybe aftermarket rear.
when someone says, "yeah its a cam only car." you know they mean they DO NOT have aftermarket heads or a built engine and maybe aftermarket rear.
all in all, the term cam-only fits well for its discription.
#26
Originally Posted by jpat1023
orangefun - that is not what most people think about cam only.
I won't cover it again as many people already have in this thread, but who gets a cam without full exhaust?? sounds about retarded to me...
I won't cover it again as many people already have in this thread, but who gets a cam without full exhaust?? sounds about retarded to me...
thats why we love the spray.
#27
TECH Senior Member
iTrader: (1)
Joined: Apr 2005
Posts: 8,807
Likes: 0
From: Vancouver,[KITSILANO].B.C. Canada *WestCoast*
Originally Posted by Nine Ball
"cam-only" means stock unported heads are still on the engine. It is an unusually gay term that a few LS1 guys thought up, which makes all of the other drag racing groups think LS1 guys that say it are homosexual.
To most of us, "cam-only" can be translated into "too cheap to buy heads"
To most of us, "cam-only" can be translated into "too cheap to buy heads"
#28
Originally Posted by orangefun
I know a guy who had long tubes on his 99 T/A , then he put 01-02 manifolds(smog ) and his 1/4 didn't even change, see out here in CA if you have a cam and it doen't idle to bad you can sneak it through smog, so lets be real, any 50 state legal headers are not going to make much more, if any, power than an 01 02 manifold.
thats why we love the spray.
thats why we love the spray.