blinker stays on

Reply Subscribe

Thread Tools

Search this Thread

Sep 17, 2007 | 09:10 PM

Powder96SS

Thread Starter

On The Tree

Joined: Apr 2007

Posts: 172

Likes: 0

From: cullman,Al

blinker stays on

today i saw a z28 in the turning lane and their signal wasnt flashing. My 97 z28 did the same thing and my friend michelles 2000 6cyl does it too. is it a common problem or just a coincidence?

Sep 17, 2007 | 09:26 PM

*98TransAm*

TECH Resident

Joined: Jul 2007

Posts: 818

Likes: 0

From: Iowa

burned out flasher is the problem, its located underneath knee bolster (underneath steering wheel where your knees are at hence knee bolster), it can be taken out by removing just a few screws, there are two flashers one for hazards and one for your turn signals by finding out which one is which just turn on your hazards and if you dont here any clicking then its the other flasher, or hell it could just be a burned out bulb.

Sep 17, 2007 | 10:24 PM

xXSilencerXx

TECH Resident

iTrader: (4)

Joined: Feb 2007

Posts: 794

Likes: 0

From: Manassas, VA

If you turn your signal and it just sits on with no blinking it means one of your bulbs on that side is burnt out.

Sep 17, 2007 | 10:39 PM

VIP1

Copy & Paste Moderator

Joined: Apr 2002

Posts: 9,764

Likes: 208

From: Eastern MA

Sticky:
https://ls1tech.com/forums/showpost....18&postcount=7

Sep 17, 2007 | 10:42 PM

DarkCloud

TECH Regular

Joined: Jun 2005

Posts: 438

Likes: 0

From: Leominster Massachusetts

not necessarily.. i have a burnt out bulb currently.. and my blinker still blinks fine.. my flasher has died twice though.. and that is exactly what was happening.