Best place to install a cutout?
#1
Best place to install a cutout?
Whats the best place to put a electronic cutout on fbodies exhausts? As in what would (if it makes a difference that is) produce the loudest sound, maybe help out gas mileage not like I care anyways about that, and if it helps give power? or not hurt torque bottom end so much. Just whats all around the best place to put it up on the exhaust, this is 1single cutout btw. Thanks
#5
TECH Enthusiast
iTrader: (3)
Join Date: Aug 2006
Location: Cali Kid livin in the Zona
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
no man i still run a flowmaster super 40 cat back i just welded the cutout into the i pipe just before the bend that goes over the axle
I also still have my stock tips on the car
Trending Topics
#9
TECH Enthusiast
iTrader: (3)
Join Date: Aug 2006
Location: Cali Kid livin in the Zona
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
havent wired mine yet (due to me not having nuts) but here is the gist of what you need to do
heres a short write up (hope it helps)
grommet
wires go through grommet i would suggest a small hole using a box cutter to keep a good seal.
make the hole just big enough to get the wire through i would go form inside the vehicle rather than out side to keep from having to pull the wires all the way through
then underneath the carpet to the front of the vehicle. you can place the switch anywhere my choice would be in front of the ashtray or anywhere in that area
then wire the ground anywhere you can find one
wire the power wire to the cigarette lighter and you should be good to go
heres a short write up (hope it helps)
grommet
wires go through grommet i would suggest a small hole using a box cutter to keep a good seal.
make the hole just big enough to get the wire through i would go form inside the vehicle rather than out side to keep from having to pull the wires all the way through
then underneath the carpet to the front of the vehicle. you can place the switch anywhere my choice would be in front of the ashtray or anywhere in that area
then wire the ground anywhere you can find one
wire the power wire to the cigarette lighter and you should be good to go
Last edited by g-ryde1; 12-29-2007 at 03:41 PM. Reason: more helpful helpings
#10
11 Second Club
iTrader: (36)
Join Date: May 2005
Location: South Jerzy
Posts: 1,449
Likes: 0
Received 0 Likes
on
0 Posts
thats where i put mine, but after running it WOT down the road a few times, my sound deadening and carpet got pretty hot and then started to burn it a lil. theres a pic i found a while back, where the guy ran a cutout right before the axle, im gonna go look for it
heres another idea- http://www.installuniversity.com/ins...t_cutout_1.jpg
heres another idea- http://www.installuniversity.com/ins...t_cutout_1.jpg
Last edited by 98TADRIVER; 12-29-2007 at 04:20 PM.
#12
TECH Resident
iTrader: (10)
Join Date: Feb 2006
Location: Herndon, VA
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
thats where i put mine, but after running it WOT down the road a few times, my sound deadening and carpet got pretty hot and then started to burn it a lil. theres a pic i found a while back, where the guy ran a cutout right before the axle, im gonna go look for it
heres another idea- http://www.installuniversity.com/ins...t_cutout_1.jpg
heres another idea- http://www.installuniversity.com/ins...t_cutout_1.jpg
#15
TECH Enthusiast
iTrader: (3)
Join Date: Aug 2006
Location: Cali Kid livin in the Zona
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
http://www.installuniversity.com/install_university/installu_graphics/freshman_year/exhaust_cutout_explanation/exhaust_cutout_1.jpg[/url][/QUOTE]
not really liking the placement of this cutout I see the logic but ehh way too much work tho. to each his own i guess
not really liking the placement of this cutout I see the logic but ehh way too much work tho. to each his own i guess
#18
On The Tree
iTrader: (6)
Join Date: Nov 2006
Location: Shelby Twp, MI
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
havent wired mine yet (due to me not having nuts) but here is the gist of what you need to do
heres a short write up (hope it helps)
grommet
wires go through grommet i would suggest a small hole using a box cutter to keep a good seal.
make the hole just big enough to get the wire through i would go form inside the vehicle rather than out side to keep from having to pull the wires all the way through
then underneath the carpet to the front of the vehicle. you can place the switch anywhere my choice would be in front of the ashtray or anywhere in that area
then wire the ground anywhere you can find one
wire the power wire to the cigarette lighter and you should be good to go
heres a short write up (hope it helps)
grommet
wires go through grommet i would suggest a small hole using a box cutter to keep a good seal.
make the hole just big enough to get the wire through i would go form inside the vehicle rather than out side to keep from having to pull the wires all the way through
then underneath the carpet to the front of the vehicle. you can place the switch anywhere my choice would be in front of the ashtray or anywhere in that area
then wire the ground anywhere you can find one
wire the power wire to the cigarette lighter and you should be good to go