problems after intake and LT install
#1
Staging Lane
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Fort Worth Tx
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
problems after intake and LT install
so i just recently installed some pacesetter LT's along with some msd wires and new ngk plugs also put a ls6 intake on. now the car seems to have a random misfire. cant figure it out i dont think its a plug wire because its not a consistant miss in the same cylender seems to be missing in random cylenders. could this be a intake leak? mabe a problem with the injectors? seems to get worse the more i drive it and when it warms up???
#2
Banned
iTrader: (2)
Most likely you have some sprak plug wires "touching" your exhaust manifold pipes. Very common after a LT install. If they're touching at all, they will arc, mainly in the mid-high rpms, but also at idle and low rpm.
If not, just make sure both ends of all the wires are "snapped" into place.
.
If not, just make sure both ends of all the wires are "snapped" into place.
.