Header Wrap
#1
Header Wrap
1) Is header wrap a good option for reducing under the hood temperatures when buying ceramic coated jobs are completely out of the question?
If so, how does this stuff stack up?
http://cableorganizer.com/insultherm-header-wrap/
If so, how does this stuff stack up?
http://cableorganizer.com/insultherm-header-wrap/
#2
It definitely helps prevent burns when you are working on a hot engine. It'll look nice at first but won't last forever especially on the bottom if you're scraping. Also don't overlap it too much or it will overheat in that area and cause the metal to bubble out to the point where it could blow out.
#3
Well then I will follow up with this. My ultimate goal is to prevent the classic burning of wires. I bought fiberglass sleeves for the spark plug boots. But I really wanted to just prevent any burning of my factory harness. Anywhere I can cut down on heat sounds like a good idea. I bought some thermal tape for where things get close to the headers but trying to figure out if wrapping the headers are justified.
#4
Remember, additional retained heat (on the surface of the headers) causes an acceleration in the reaction of the metal and O2 in the air leading to premature rusting.
So, if you don't coat the headers, painting them with that rust inhibiting paint (akin to POR15) in a rattle-can will really help stave off rust.
So, if you don't coat the headers, painting them with that rust inhibiting paint (akin to POR15) in a rattle-can will really help stave off rust.
#5
TECH Fanatic
iTrader: (10)
Remember, additional retained heat (on the surface of the headers) causes an acceleration in the reaction of the metal and O2 in the air leading to premature rusting.
So, if you don't coat the headers, painting them with that rust inhibiting paint (akin to POR15) in a rattle-can will really help stave off rust.
So, if you don't coat the headers, painting them with that rust inhibiting paint (akin to POR15) in a rattle-can will really help stave off rust.
Trending Topics
#11
#13
I don't think anyone sells stainless headers coated. And getting them done seems like a hassle and expensive.
#14
I was all about the header wrap simply to cut down on heat in the engine bay and to not melt wires that were routed close to them... I was putting on new kooks SS headers and i spent 4 hours wrapping them. man they looked nice and it would have lasted...... EXCEPT for i could not get the driver side header in with the wrap. no matter what i did or tried it would not fit and i ended up taking it off and it slide right in.
so if you do wrap them be aware install is going to suck, and possibly tear the wrap up a bit.
so if you do wrap them be aware install is going to suck, and possibly tear the wrap up a bit.