2000 Camaro Wiper Blades
03-22-2013, 08:59 PM
#21
Yes, mine sit perfectly, and do NOT even catch/stick on the windsheild molding on the passenger side.
You CAN adjust the arm angle by loosening the 10mm bolt mounting the arm to the motor shaft (under the plastic cover).
As soon as Rain Beaters switches their assembly/manufacturing from China back to Indiana(??), I am going to try those next since I've heard great things about them.
I believe they offer BOTH old style blades AND the newer beam blades.
You CAN adjust the arm angle by loosening the 10mm bolt mounting the arm to the motor shaft (under the plastic cover).
As soon as Rain Beaters switches their assembly/manufacturing from China back to Indiana(??), I am going to try those next since I've heard great things about them.
I believe they offer BOTH old style blades AND the newer beam blades.
12-17-2013, 02:45 AM
#22
Old thread but good info here. I've always had 93-97 f-bodies and the hook is different than the 98-02's. I used the Trico 24-9R's for my 93-97's for a factory look that actually higs the window. I will look into some of these blades mentioned in the thread as mine are shot.
