oil pressure 0 at idle?
#1
On The Tree
Thread Starter
Join Date: Oct 2005
Location: san diego
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Frustrated!
Hi everybody, I'm new here and I want to tell you about my problems with my 1996 ws6. Maybe somebody has some answers. My oil pressure is good when cold(idle and driving), but when it warms up it goes to sh*t. It still makes about 18-25 while driving, but at idle it will always fall to 0. I have to rev it when stopped in fear that I really have no oil pressure. My car runs beautifully and there have never been any starnge sounds.
The car runs hot too. It takes forever to warm up and then when it does it always goes to the 235 mark before the fans kick in. It then runs anywhere from 215 to 230. I have a 160 thermostat, which I realize doesn't really reduce overall temperature. What is wrong with my stallion? Any help would be much appreciated.
The car runs hot too. It takes forever to warm up and then when it does it always goes to the 235 mark before the fans kick in. It then runs anywhere from 215 to 230. I have a 160 thermostat, which I realize doesn't really reduce overall temperature. What is wrong with my stallion? Any help would be much appreciated.
#3
On The Tree
Thread Starter
Join Date: Oct 2005
Location: san diego
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
oil pump or bye bye motor?
stock gauge: 0psi at hot idle, 20-25 while moving. 45 cold idle. Mechanical guage: 14psi hot idle, 30 highest at any revs. Have replaced sending unit and changel oil and filter. Runs beautifully and has never made any noises. Please somebody give me $.02.