thebatman411

iTrader: (4)

The felt can look like it's ok, but if you have your tint all messed up then you need to change them out. You can see the difference between a new window stabilizer and a used one. The felt on the used one tends to be pointing one direction and isn't as full with felt.

L SS 1

I have two lines of ware on both of my windows, the tint is not torn, could it also be on the outside i cant really tell.

thebatman411

iTrader: (4)

when your tint is rubbing off in a straight line it's a good indicator that the felt is no longer performing it's function. When you start seeing tears then most likely your window stabilizer is broken.

L SS 1

So the wear can only be on the inside and not on the outside of the window? ill replace the tint and the felt tips. ihope the glass its self was not scratched before the car had tint.

99'CajunFirehawk157

iTrader: (57)

I know this is an old thread but I have a similar issue:
On both windows apx 2" from the top of the glass, when my windows are DOWN, something in the door is rubbing/cutting on my tint, both windows have a hole in the tint apx the size (width) of a pencil eraser, the rh side started first then a few months behind the drivers side. My guess is when the door is slammed, something is hitting when this happens? Anyone else have this issue and does this sound like the same slider issue?

CO99Z28Vert

iTrader: (30)

I had the same problem but fixed it AFTER getting the tint on




The window stabilizers were $40 for all 4 at the dealership because he said they were $20 a piece but would cut me a deal...I dont know if he was bullshitting or not but it was worth $40 to get this problem fixed.

Hope this helps you.

99'CajunFirehawk157

iTrader: (57)

Awesome pic, now I know just what to look for, thanks CO99Z28Vert

CO99Z28Vert

iTrader: (30)

No problem, im glad I could help.