My car just died
#1
Teching In
Thread Starter
Join Date: Dec 2005
Location: Sweden
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
My car just died
Hi guys!
I was out on a high speed test when the car just died. Just lika you run out of gas. I have a spark and fuel pressure in the rails. But it wont start! The only code on my DIC is "P0343" Camshaft Position (CMP) Sensor Circuit High Voltage . Whats wrong? I cant see any damage on the cabels or anything. Is the Cam sensor broken?
/Richard
Specs are:
2001 Corvette
forged 347, F1R (15+ psi), 224 228, Roll master timing change, ETP 240, LG Racetronik pump and KBP, lts, 75 lbs, and stuff.
I was out on a high speed test when the car just died. Just lika you run out of gas. I have a spark and fuel pressure in the rails. But it wont start! The only code on my DIC is "P0343" Camshaft Position (CMP) Sensor Circuit High Voltage . Whats wrong? I cant see any damage on the cabels or anything. Is the Cam sensor broken?
/Richard
Specs are:
2001 Corvette
forged 347, F1R (15+ psi), 224 228, Roll master timing change, ETP 240, LG Racetronik pump and KBP, lts, 75 lbs, and stuff.
#3
Teching In
Thread Starter
Join Date: Dec 2005
Location: Sweden
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
No, it just died just like I was running out of fuel. i have spark and fuelpressuere but it wont start. My only code at my DIC is "P0343" Camshaft Position (CMP) Sensor Circuit High Voltage.
WTF does that mean?
WTF does that mean?
#6
Teching In
Thread Starter
Join Date: Dec 2005
Location: Sweden
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ABeasst
does it crank?