firebirdman469

iTrader: (3)

I have searched endlessly to no avail. I have been able to find a write up on how to replace a camaro window motor, but not a TA motor. I was wondering if there is one, and if there isn't, then is it a lot different then the Camaro write up?? Any info would be appreciated, especially if you TA guys have done it before

-James

Somebody09

I'd like to know this as well. This is the 2nd time my windows are screwing up and this time I don't have any warranty!

jmm98LS1

iTrader: (28)

http://www.shbox.com/page/windowmotor.html
T/A's and Camaros are the same procedure.

FBDYLVR

iTrader: (14)

The locations where the rivets are different in the pictures though, since T/As and Camaros have different doors. You just have to eyeball the locations where you drill.

firebirdman469

iTrader: (3)

SWEET!! EYEBALLING!! That's what I was afraid of. The last time I eyeballed something, I ended up buying a new one! lol......

Anymore people out there with any info??

firebirdman469

iTrader: (3)

I guess no one knows anything more then?? lol

Danny2tek

iTrader: (1)

The rivets holding the motor were in the same locations in my TA and bros Camaro. Use the above how-to.

Pewterpower

It's all the same. Just don't drill all the way thru your door.

FBDYLVR

iTrader: (14)

Well, they're in the same locations, but if you look at the picture of the Camaro, and the door on a T/A, you can't really match it up because they have different "landmarks" in the door panel.

Splitz

iTrader: (1)

i'm that stupid tho!

Marc 85Z28

iTrader: (8)

Camaro or TA, each window motor has 3 rivets in the same place, and all are visible. If you can figure out how to get the door panel off, that's all the brainpower you'll need to locate the rivets and drill access holes in the door panel. You don't need an overlay or template. Use some common sense.