Check Engine Light Codes
#61
Launching!
Join Date: Jan 2006
Location: South Jersey
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
My car is throwing P0200.... is this a common code? I have no idea where to start
It happend today, my car felt like it was missing and falling on its face, than my SES light actually flashed. Never saw it flash before.
It happend today, my car felt like it was missing and falling on its face, than my SES light actually flashed. Never saw it flash before.
Last edited by chemicalstylez; 05-27-2008 at 09:07 PM.
#63
Threw a P1133 (Insufficient switching bank 1 sensor 1 02)
Should I just go ahead and replace em both? wiring looks fine and a fresh set could never hurt. What do you think? ACDelco still the best?
Should I just go ahead and replace em both? wiring looks fine and a fresh set could never hurt. What do you think? ACDelco still the best?
#66
My 2002 Z/28 just threw the very same codes . Did you ever get an answer from THE MAN on what exactly we need to replace or do to fix ?
Auto Zone said it was the 02 sensors . Which is it pray tell ?
CODES P0171 & P0174
Auto Zone said it was the 02 sensors . Which is it pray tell ?
CODES P0171 & P0174
Last edited by THE BIG KAHOONA; 06-06-2010 at 11:05 AM.
#69
check engine light codes
Hello, I just recently had my engine rebuilt. I have a 1995 Camaro Z28 LT1, I got eberything put back together and my check engine light is now on.
I am getting two codes. The first one is 043 Elec Spark Control (ESC) Module or Sensor Problem. The other one is 084 Output Driver Module (ODM) Fault Skip Shift Circut.
I put a new MSD distributor on when I was putting the car back together and the car seems to run fine. So I am having some trouble figuring out what the codes are there for... anyone have any ideas or suggestions? Thanks.
I am getting two codes. The first one is 043 Elec Spark Control (ESC) Module or Sensor Problem. The other one is 084 Output Driver Module (ODM) Fault Skip Shift Circut.
I put a new MSD distributor on when I was putting the car back together and the car seems to run fine. So I am having some trouble figuring out what the codes are there for... anyone have any ideas or suggestions? Thanks.
#71
I have a P0785 shifter solenoid fault. I have changed the solenoid also changing the fluid and filter at the same but the error remains. After 10 minutes of driving I can clear the code and it stays off for the rest of the day. When the engine is cold again or the next morning the error is back and is very infurriating!
Can anyone offer any advice please? My ride is a 99 Trans Am Conv.
Can anyone offer any advice please? My ride is a 99 Trans Am Conv.
#72
So i need help understanding the Skip shift. I have a 2012 ss, completely rebuilt nothing stock. I got it running about 3 months ago, and about two weeks ago it starting acting like it wanted to throw me out of third and my check engine light came on. So i was going to head straight to a scanner. On the way it got worse, It started doing it in 2nd, 3rd, and 5th. Then when i pulled up to Advanced and scanned it, there where like 13 codes. Skip shift was the biggest one that popped up. Then i lost my reverse so i had to roll it back and it let me get it home but now when i try to start it it turns over and just dies, We unplugged the battery to try and reset it and the skip shift still shows on the scanner. My tuner says he tuned it off but didn't delete it. Any opinions or advise ?
Codes:
P0801
P080C
P0056
P0036
P069E
P2534
Codes:
P0801
P080C
P0056
P0036
P069E
P2534