The spring in the window assembly
Thread Starter
Teching In
Joined: Mar 2004
Posts: 36
Likes: 0
The spring in the window assembly a friend of mine was replacing his window motor but he took the x that rides on the window rails and the spring thats in the center of the x came off how do you put that spring back on with the right tension?
I replaced both of my window motors about a 1 1/2 years ago. After putting everything together, I shut the door and the springs fell out on both sides. I took everything apart again. Put it all back together again. I shut the doors again and they came out. So I took the door panel off and took the springs out and put them in my garage. The windows have worked fine.
TECH Fanatic
Joined: May 2005
Posts: 1,135
Likes: 1
From: The 'Burgh, PA
My driver's side door hasn't had the helper spring in it for almost 3 years, so I am leaning towards the "it doesn't matter" conclusion. The window works the same as the un-altered passenger side-no problems.
Trending Topics
Its not a spring - its a counterbalance for the weight of the window. Without the spring, your motor will have to work harder and will not shut the glass quite as tight against the seals as it would otherwise.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
