How do I zero out the TPS sensor?
unplug it,(with the ignition off) then turn to the on position, pcm should recognize the fault and a DTC will be set(not sure if the light will come on), then turn ignition off re connect the TPS, and start the car, after wards the car should recognize that the fault is no longer there and the DTC should clear(but dont quote me, its been awhile since i did mine)
Originally Posted by mcamarols1
unplug it,(with the ignition off) then turn to the on position, pcm should recognize the fault and a DTC will be set(not sure if the light will come on), then turn ignition off re connect the TPS, and start the car, after wards the car should recognize that the fault is no longer there and the DTC should clear(but dont quote me, its been awhile since i did mine)
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
