General Maintenance & Repairs Leaks | Squeaks | Clunks | Rattles | Grinds

I need some help, Lots of help!! OBD Gurus inside PLEASE!!!

Thread Tools
 
Search this Thread
 
Old 03-29-2007, 07:46 PM
  #1  
On The Tree
Thread Starter
 
OOZ28's Avatar
 
Join Date: May 2005
Location: Midland, Tx
Posts: 135
Likes: 0
Received 0 Likes on 0 Posts
Default I need some help, Lots of help!! OBD Gurus inside PLEASE!!!

My car is throwning 6 codes, SIX!!!!! I think its time for some help!

P0151 - 02 Sensor Circuit low voltage (bank 2 sensor 1)
P0135 - 02 Sensor Heater Circuit Malfunction (bank 1 sensor 1)
P0174 - System to lean (bank 2)
P0230 - Fuel Pump Primary Circuit Malfunction
P0300 - Random Misfire
P1153 - I have no clue

My car has never ever had this many problems before, and I have no idea where to start trying to fix them, or even how to go about it!

And just to throw it out there, when I first start driving to work in the morning, the car runs fine, however, about 1/2 way there it starts to miss really bad under normal driving, if I let out or punch the gas a little, it will stop for about 2sec and start all over again, then the ses light will flash, and stop, then the car will run fine untill I come to a stop, then It will start to miss a little, and by the time the light turns green it sounds like I have a huge cam in it, then we start all over again with the misfire, the flashing ses light, and then the normal driving. And It will do this all throughout the day, no matter how I drive it. I feel like any suggestions on how to fix these problems will be GREATLY appreciated!!!!!!!!!!

Mods: Lid, PP T/B, LS6 Intake, Pacesetter L/Ts, 3in X-pipe, 160* Stat

Oh yeah, and If anyone know what P01153 please share!!!
Old 03-29-2007, 09:14 PM
  #2  
TECH Fanatic
 
ghardester's Avatar
 
Join Date: Aug 2006
Location: Knappa, Oregon
Posts: 1,386
Likes: 0
Received 54 Likes on 43 Posts

Default

P1153 (no zero) is HO2S Insufficient switching bank 2 sensor 1.




All times are GMT -5. The time now is 08:46 AM.