A/C Problem, main vents not working

Reply Subscribe

Thread Tools

Search this Thread

Apr 10, 2007 | 10:05 PM

bastien

Thread Starter

12 Second Club

iTrader: (1)

Joined: Jan 2005

Posts: 1,050

Likes: 0

From: Orlando, FL / UCF / Brussels, Belgium

A/C Problem, main vents not working

After my cam install a few months ago, my A/C went to crap. No matter what settings my A/C is on, it will not blow through the little vents, only the main central one by the windshield. The air being blown out is cold, like it was before.

Any help will be greatly appreciated.

Thanks!

Apr 10, 2007 | 10:51 PM

bastien

Thread Starter

12 Second Club

iTrader: (1)

Joined: Jan 2005

Posts: 1,050

Likes: 0

From: Orlando, FL / UCF / Brussels, Belgium

Could it be the vacuum line? I think it might be loose. I will check tomorrow.

Apr 10, 2007 | 10:52 PM

96slow6

Launching!

Joined: Aug 2005

Posts: 231

Likes: 0

Go to shbox.com there is a good write up on how to restore the flow.

Apr 10, 2007 | 10:57 PM

bastien

Thread Starter

12 Second Club

iTrader: (1)

Joined: Jan 2005

Posts: 1,050

Likes: 0

From: Orlando, FL / UCF / Brussels, Belgium

Quote:

Originally Posted by 96slow6

Go to shbox.com there is a good write up on how to restore the flow.

thanks! I am thinking it's my vacuum line. My RPMs drop really slowly compared to before my cam, which means my vacuum line is unplugged, if I am not mistaken.

Apr 10, 2007 | 10:59 PM

96slow6

Launching!

Joined: Aug 2005

Posts: 231

Likes: 0

Thats what the write-up talks about. Also there is a diaghram under there that goes bad some times.

Apr 10, 2007 | 11:04 PM

the_merv

Banned

iTrader: (88)

Joined: Mar 2006

Posts: 21,019

Likes: 893

From: The Beach...

Mine went out, and it only blows on the Windshield, and by your feet. I just removed all the Vacuum crap, haven't had a problem with it since, still blows in the same spots.