ABS INOP, BRAKE, ASR OFF lights on?
08-14-2007, 11:38 PM
#21
TECH Regular
iTrader: (8)
Join Date: Jul 2006
Location: Costa Mesa, CA
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
So while were on the subject, I have the ABS INOP and ASR OFF lights on, pulled the code and it was a:
Right Rear Wheel Speed Sensor Malfunction (might have said high voltage)
I spun the wheel though and through the TECH 2 scanner I scanned the wheel speeds and it seemed to read properly.
Any ideas?
08-15-2007, 07:53 AM
#22
Fibbado,
If it was a high voltage fault of the rr wheelspeed sensor, it is odd that the sensor reading seemed to be working. I need to check some of the documentation I still have to see if the rear left data is copied to the rear right if it fails out. I will try to do that tonight and get back to you.
If it was a high voltage fault of the rr wheelspeed sensor, it is odd that the sensor reading seemed to be working. I need to check some of the documentation I still have to see if the rear left data is copied to the rear right if it fails out. I will try to do that tonight and get back to you.
10-09-2007, 05:18 PM
#24
Teching In
Thread Starter
Join Date: Sep 2005
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Updated information 10-09-07 from originator When I saw the service manager come in the dealer showroom and asked if I wanted to sit down...I knew I was in trouble. The stealership says that the EBCM is bad and needs to be replaced. They "only" wanted $1,200 for a new one. What is the best alternate plan? Anybody? Anybody?
10-11-2007, 02:11 PM
#25
On The Tree
iTrader: (1)
Join Date: Nov 2001
Location: Nashville, TN
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
You can get a used one for cheap off the For Sale forum or Ebay. Make sure you double check if it's for a tcs or non-tcs car. I made that mistake and bought a wrong one.
BTW, that ABS module is for sale. It's for a non-tcs car. If any one wants it, just PM me.
BTW, that ABS module is for sale. It's for a non-tcs car. If any one wants it, just PM me.
10-18-2007, 08:53 AM
#27
Teching In
Join Date: Sep 2007
Location: Seabrook,TX
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
My ABS/INOP and "BRAKE" lights came on, no ses etc, when it was raining alot then after it had dried up for a week they went off. They just came back on now that it has been raining again...just do what Homer does and stick a piece of electric tape over the light :p
