QTP electric cutout problems
Thread Starter
9 Second Club
iTrader: (31)
Joined: Oct 2002
Posts: 3,175
Likes: 2
From: Nashville, TN
QTP electric cutout problems enyone ever had a problem with the valve not opening and closing after about an hour...it's like it locks up or something...i am about positive i wired everything right, and the switch still works right too.....but it won't close back, when i trun the car off(leaving the key in the on position), get under the car, and flip the switch back and forth, i can here the motor trying to move the valve it sounds like, but it doesnt move....what is goin on here???
Thanks
Tim
Thanks
Tim
Re: QTP electric cutout problems The screws that keep the motor drive gear insync with the valve drive probably came loose so now when the motor gear spins it is not in proximity to the gear on the valve, thus it doesn't move.
QTP will fix it right up for you. Call up Barry and he'll get you squared away
QTP will fix it right up for you. Call up Barry and he'll get you squared away
Re: QTP electric cutout problems
mine doesnt work unless the engine is running either but it did that since new so i didnt really think anything of it
Thread Starter
9 Second Club
iTrader: (31)
Joined: Oct 2002
Posts: 3,175
Likes: 2
From: Nashville, TN
Re: QTP electric cutout problems the carappy thing is that i already sent the cutout back once before for about the same problem, they were awesome customer service, and took it back, seemed to work better and last longer....but its still up to the same ole tricks......
before, it'd go out in like 5 min......
now it went out after having no problems out of it for like 5 days...WOO HOO....
before, it'd go out in like 5 min......
now it went out after having no problems out of it for like 5 days...WOO HOO....
