Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

TSP Lid ?

Thread Tools
 
Search this Thread
 
Old 10-30-2008 | 02:28 PM
  #1  
LS1ne's Avatar
Thread Starter
On The Tree
iTrader: (6)
 
Joined: May 2006
Posts: 167
Likes: 0
From: Texas
Default TSP Lid ?

http://www.highperformancepontiac.co.../photo_08.html

in this pic, how to do you get that "gap" under the TSP lid. its right uder the clips that hold the lid down(the silver/white color duct). is this a free mod?
Old 10-30-2008 | 03:23 PM
  #2  
12secSS's Avatar
TECH Junkie
iTrader: (30)
 
Joined: Nov 2001
Posts: 3,690
Likes: 1
Default

What you are looking at (silver/white color duct) is the upper radiator support and the WS6 lower air box opening. It is factory like that, it will not work on Camaro models.
Old 10-30-2008 | 05:43 PM
  #3  
Danny2tek's Avatar
TECH Veteran
iTrader: (1)
 
Joined: Oct 2002
Posts: 4,770
Likes: 7
From: Miami
Default

yea the WS6 has a raised opening in the lower air box
Old 10-31-2008 | 02:31 AM
  #4  
noriceinside's Avatar
TECH Enthusiast
iTrader: (6)
 
Joined: Feb 2006
Posts: 567
Likes: 2
From: Valencia, CA
Default

1. thats not a tsp lid, its obviously a rpm lid.

2. how to do you talk like that?

3. i think the only hood it works with is a factory ws6 hood. ive seen an aftermarket ws6 hood that it wont clear.
Old 10-31-2008 | 08:28 AM
  #5  
teke184's Avatar
TECH Junkie
iTrader: (5)
 
Joined: Feb 2007
Posts: 3,183
Likes: 2
From: Key West, Florida
Default

as stated, its a raised WS6 air box.

i believe you can run it with the aftermarket UltraZ hood.

but a SSRA would be more productive




All times are GMT -5. The time now is 06:15 PM.