ls6 intake on stroker?
Thread Starter
Staging Lane
Joined: May 2008
Posts: 80
Likes: 0
From: illinois
ls6 intake on stroker? Hey i was just wondering if anyone on here knew how an ls6 intake would perform on a 408 stroker making a little over 500whp? i know its not the best intake for that application but i was wondering bc i need the car to appear as stock as possible and im also on a budget. thanks.
I'm not sure how well a 408 with an MS3 is gonna pull off the stockness that you're going for.
It will perform fine. I'm sure there are lots out there with similar combos. It would just perform better with a better intake
It will perform fine. I'm sure there are lots out there with similar combos. It would just perform better with a better intake
Trending Topics
Thread Starter
Staging Lane
Joined: May 2008
Posts: 80
Likes: 0
From: illinois
okay thanks guys a appreciate it, i saw a comment out there about budget heads, the car is actually my buddies t/a, he has patriot stage 2 ls6 heads, 2.02/1.57 and flow 296 at 600 lift, already owns the ls6 intake and wants to know if that will be sufficiant enough or if the motor is plain just gonna run bad. thanks
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
