Question on Headers and EGR
#1
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Mar 2008
Location: NJ
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
Question on Headers and EGR ASAP!!!
i have kooks long tube headers and on the passanger side i want to know what you guys did with the egr tubes that went into the stock exhaust manifolds, since there are 2 on the passenger side one is longer then the other, did you bend them back a little or push them back so they can fit....just wondering so i can get and idea on what to do
Last edited by ReApEr75; 03-14-2009 at 06:53 AM.
#3
there should only be 1 egr tube and the other 1 is part of the air system.
if you want headers you can get the ones with the hook ups for the air and egr and if you remove those systems later on you can get the block of plates or just do it at the time you install the headers and get the race versions
if you want headers you can get the ones with the hook ups for the air and egr and if you remove those systems later on you can get the block of plates or just do it at the time you install the headers and get the race versions
#4
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Mar 2008
Location: NJ
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
i understand that but i want to hook them back up for the time being and was wondering if they just bolt right back into place or do i have to adjust the pipe for both the egr and air intake for that passanger side?