Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

knock sensors tuned out

Thread Tools
 
Search this Thread
 
Old 03-17-2009 | 08:58 PM
  #1  
SilverStingerSS's Avatar
Thread Starter
Teching In

iTrader: (6)
 
Joined: Oct 2006
Posts: 36
Likes: 0
From: Dallas, Tx
Default knock sensors tuned out

Been in the navy for over a year now so havent been driving the car much since its back home, question is about a year ago i was having the knock sensors go nuts on me replaced both and the harness twice same problems with no noticable motor issues. So my tuner tuned them out, is that a big deal to have them tuned out like that???????
Old 03-17-2009 | 10:47 PM
  #2  
NateLS1's Avatar
12 Second Club
iTrader: (4)
 
Joined: Aug 2004
Posts: 336
Likes: 0
From: Cape Cod, MA
Default

Yup. Need those knock sensors, they save your engine. Plus they are used to aid in tuning the car.
Old 03-18-2009 | 12:02 AM
  #3  
SS1875's Avatar
11 Second Club

iTrader: (34)
 
Joined: Feb 2005
Posts: 3,158
Likes: 0
From: Ft. Wayne, Indiana
Default

Tuners can desensitize them, especially if your running a big cam or anything that increases valve train noise.....Never turn them off BAD idea!!
Old 03-18-2009 | 06:40 PM
  #4  
SilverStingerSS's Avatar
Thread Starter
Teching In

iTrader: (6)
 
Joined: Oct 2006
Posts: 36
Likes: 0
From: Dallas, Tx
Default

car is stock internal going home on leave soon and plan on torquer 2/h/i install so need to get this fixed. What could have been the problem? i installed to different sets with 2 different wires originally it was the front knock sensor then went ahead changed both then got codes for both while replacing wire harness. replaced them twice!!
Old 03-19-2009 | 03:12 PM
  #5  
SilverStingerSS's Avatar
Thread Starter
Teching In

iTrader: (6)
 
Joined: Oct 2006
Posts: 36
Likes: 0
From: Dallas, Tx
Default

anyone else?




All times are GMT -5. The time now is 05:44 PM.