Alt Relocation Bracket
Here's AEI's bracket on a car we installed it on this weekend. Can't ask for a better machined part in my opinion! Fits nice and snug. This was on a ASP pulley for those wondering.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo They sell it as a complete kit, or you can just buy parts. The only way they could get it to clear the 6.0 manifold setup is to run a smaller alternator. It still cranks out 75max amps (stock is only 100), which should be perfect for a car with no AC. I'll let them PM you, or i hit me up on a PM later today if you still haven't received anything from them.
The kit, if you buy the alternator, comes with their custom alternator pulley, and they cut you a deal on the crank pulley if you buy that at the same time as well. Good stuff!!
The kit, if you buy the alternator, comes with their custom alternator pulley, and they cut you a deal on the crank pulley if you buy that at the same time as well. Good stuff!!
Reviving from the dead.........so has anyone tried the one mounted low on the passenger side where the a/c comp would be found? i'm gonna try calling them tomorrow to ask some questions.
it's a bit more than some of the others but not the most expensive and it's all top notch materials! if it works its definitely worth the extra to keep from having to mount the alt up high and i don't have the option for v'bands on my manifolds as it's a complete kit thats already high temp coated as well.
it's a bit more than some of the others but not the most expensive and it's all top notch materials! if it works its definitely worth the extra to keep from having to mount the alt up high and i don't have the option for v'bands on my manifolds as it's a complete kit thats already high temp coated as well.
correct me if i'm wrong but are you saying the d/s one is also able to be used with the non modified truck manifold kits (non v'banded)?
it says nothing about that on his site pertaining to the driver side bracket, only the passenger side piece.
it says nothing about that on his site pertaining to the driver side bracket, only the passenger side piece.
