HELP: No reading from O2 sensor
I am sure the O2 sensor is in perfect working order - That can't be it.
I plugged the rear O2 harness into the front O2, and switched the pins in the PCM (essentially switching the rear O2 harness and making it a front harness) and still, no reading.
What could be the problem?!
Last edited by Spd-Kilz; Aug 16, 2009 at 07:24 PM.
open sensor ought to fault out and produce a 490mV
(or so) scan tool reading. If you get nothing -at all-
then it's something besides the sensor. If it's stuck
mid-range then this is a sign that there is a stored
code and that bank has been forced open loop.
When I swap a perfectly good sensor from the drivers side to the passenger side it doesn't work.
open sensor ought to fault out and produce a 490mV
(or so) scan tool reading. If you get nothing -at all-
then it's something besides the sensor. If it's stuck
mid-range then this is a sign that there is a stored
code and that bank has been forced open loop.
The car is currently in open loop since the second it's put in closed loop, it runs terribly (because of the sensor).
Trending Topics
The Best V8 Stories One Small Block at Time

