Well i started getting all my parts together for my lsx conversion and i got my fuel rail and intake manifold and i wanted to see it on the motor and as i would putting the rail on i noticed that it wasn't sitting right so i thought i had it in backwards but i looked online and it looks like the FPR is on the driver side on all the pics i took. why is it that its not fitting right on my lqx motor? here is a pic to show you what i mean




what do you guys think?

 

Those are truck coils designed for truck style intakes...But you can easily just bend/coax the fuel inlet out of they way with no problems or adverse affects...It's been done many times...

 

i was scared to bend it because it looks like there is a brace welded to it to hold it straight but i can bend it some thanks for the input

 

bend it or use ls coils

 

i just wasn't sure if i could i have a bending tool i will do it as soon as i get to my garage (wife is going into labor and i have a few mins to post since she is sleeping waiting for the full force to kick in i am going to nap now too..lol)

 

Use those truck coils!!! Check it out: Watch and read!!!!

http://video.google.com/videoplay?do...65754251&hl=en

https://ls1tech.com/forums/generatio...p-18-6-tq.html

 

thanks for that great info man!!

 

i finally took the time to work on my motor and with a little muscle i got it on there perfectly