Ls1 inTake and TB
Thread Starter
Staging Lane
Joined: Oct 2009
Posts: 81
Likes: 0
Ls1 inTake and TB i have LUMINA SS coupe ls1 engine w 6sd MT with DART heads , cam 118 , longtube headers w corsa catback and UD pulley so that i want best one of intake mainfold and TB ??
which one is better Fast 90,92,102 or nick william or bbk or .... ??
and how can i decied if i can fit 92 mm or 102 mm ??
can i fit ls2 or ls3 intake manifold on ls1 engine ??
which one is better Fast 90,92,102 or nick william or bbk or .... ??
and how can i decied if i can fit 92 mm or 102 mm ??
can i fit ls2 or ls3 intake manifold on ls1 engine ??
the 90mm isnt made anymore, u can get the used or some may still have new ones.
the 102mm is designed for the square port heads
LS6 are cheap like 350 now used.
LS2 you would need a MAP ext and you could use it.
I would personally go with a 92mm fast and a Fast 92mm TB ot NW TB
the 102mm is designed for the square port heads
LS6 are cheap like 350 now used.
LS2 you would need a MAP ext and you could use it.
I would personally go with a 92mm fast and a Fast 92mm TB ot NW TB
Teching In
Joined: Oct 2009
Posts: 25
Likes: 0
From: Wichita, KS
I know I asked this in another thread, and nobody seemed to notice. Is it possible to take an ls6 manifold, and open up the mouth on it for a larger throttle body? Possibly 90mm or so? And would that big of a throttle body even bolt up to an ls6 manifold?
Weiand , BBK, Professional Products typhoon are other options...LS2 and the LS3 wont do much more then your stock intake except for maybe a few hp in the higher rpms , plus there is extra parts needed for them to work...Id get the LS6 before either of those. All the intakes I listed above generally put out around the same hp as the LS6 on a stockish motor, if you can swing the Fast go for it w/ either a P&P stock TB or a matching mm one.
Last edited by MonmouthCtyLS7; Oct 23, 2009 at 06:53 AM.
Thread Starter
Staging Lane
Joined: Oct 2009
Posts: 81
Likes: 0
what size of ls6 intake ?? what size of ls1 stock intake ?? ok if i want to install ls6 intake which one of throttle body can i install with it 90 mm or 92 mm ?? or do porting for my stock throttle ? what about maf should i porting it too or change it with other one ??
Trending Topics
Theres a new 102mm FAST coming for cathedral port heads but it wont clear stock hood. I would go with a ported FAST 92mm combo. Proven and fits your hood. Its what I have and gave me 17rwhp and ok under the curve power like 4500-6400.
Last edited by Johnnystock; Oct 23, 2009 at 07:08 PM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo what size of ls6 intake ?? what size of ls1 stock intake ?? ok if i want to install ls6 intake which one of throttle body can i install with it 90 mm or 92 mm ?? or do porting for my stock throttle ? what about maf should i porting it too or change it with other one ??
