rob69zombie

iTrader: (7)

My buddy did this to his SS with good results and I decided to do the same and share some pics for those who don't know what it is or involves. Thanks Jamie!!! Enjoy.
This is the condenser shroud the lid-base sits on with 2 rectangles cut out of it

This is the lid-base with the lower section cut completely out

This is the base reinstalled on the condenser shroud and the filter plate put back in

Then the lid is back on and everything that has been cut out really shows through the clear lid. I thought it looked cool seeing the path the air takes to the throttle body

When everything is back together it looks and fits exactly as before

1979rs/z28

iTrader: (21)

Man those pics came out GOOD! It was cool everything went smooth and hopefully it'll be the same way when we put your bumpstick in!

TORCHD 02 TA

iTrader: (39)

welcome to 1998

outtacontrolz28

Looks good Josh

Quik Sand

iTrader: (6)

Beaflag VonRathburg

iTrader: (176)

The best thing you could add would be something like the sux2bu ram air setup. Search and you'll find it.

Haha, I was going to say something of that nature.

RrCoX22

iTrader: (6)

good stuff... did this the 1st week of owning both of my camaros. amazing the slight difference in help the LS1 "breathe" a little

philsblwnz28

iTrader: (10)

P&P that throttle body.....Put some washers under the 4 bolts on the radiator support to bring it up some. It works!!!!

CamdLS1'00SS

iTrader: (12)

you left the center brace in the air box insert? granted it doesnt do much but when i did my Z28 i cut ALL of the obstructions out. GREAT pics, turned out real nice!

orangeapeel

iTrader: (18)

Ahh yes, the discoveries of the newer LS1 crowd.

LS1W66

Ah yes I remember doing this an the EGR mod back then.

philsblwnz28

iTrader: (10)

Do all the free mods you can, it gained me .6 in the 1/4 when i got done doing all mine. The LS1's love cold air and alot of it so keep that in mind

rob69zombie

iTrader: (7)

Thanks guys. I'm not a new LS1 owner, I just never really cared about doing the free mods that much. I posted these up for people who are new to LS1's and figured it would be cool to show through my TSP clear lid. Thanks Jamie and Justin for the comments.

Jolly

Man, that brings back memories. Its all good....

senicalj4579

iTrader: (41)

nice clear lid. i had one on my first car.
you got the ramair hole cut now all u need is a prefabed ramair duct to fit in there to the bottom of your car.......hellya

rob69zombie

iTrader: (7)

Thanks man, but it's a TSP lid. They haven't made it in 3 years or so. If I'm not mistaken TSP made this one before MTI made one. I plan on fabbing up a chute or duct for it. Thanks again for the comments!

AnnivSS

I did this within about 48 hours of owning my SS lol. I had done it previously on my 91 z28 as well, its amazing what you can do with a dremel and a little time.

senicalj4579

iTrader: (41)

the clear lids are my fav.
i had a ssra on my 98 and that fit in there pretty nice. its better to fab something up if you know how though cause i think that ssra was 200 bucks for plastic lol my main trade is sheetmetal but i didnt have time lol

b-ron

nice pic's good info for new ls1 owners

dean85gt

iTrader: (7)

what other free mods are there? I did a search with no luck