What TQ Arm with duals?
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Feb 2003
Posts: 1,527
Likes: 0
From: bridgwater, nj
What TQ Arm with duals? Trying to figure out what Torque Arm I should invest in that will not have any interferance/clearance problems with the Xpipe and duals. Any pics would be appreciated. Thanks .
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Feb 2003
Posts: 1,527
Likes: 0
From: bridgwater, nj
Checked out Madman. Is that all bolt up? It said something about welding on the website. I couldn't really tell from the pics. It its a bit too pricey for me. What about other TqAs like spohn?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
We are in the process of designing our torque arm setup. We are using my car to test it. I have 3 inch true duals so i can assure you it will work great with a true duals
As i said, we are still designing/working the bugs out, but its going to be an extremely strong setup. It will tie in with the subframe connectors and incorporate a drive shaft safely loop.
I will keep you all posted and be sure to post up pictures once we have it complete.
Zack McCrory
PA/Pro Fabrication
As i said, we are still designing/working the bugs out, but its going to be an extremely strong setup. It will tie in with the subframe connectors and incorporate a drive shaft safely loop.
I will keep you all posted and be sure to post up pictures once we have it complete.
Zack McCrory
PA/Pro Fabrication
Last edited by WILWAXU; Jan 24, 2004 at 10:40 AM.
TECH Enthusiast
Joined: Sep 2003
Posts: 568
Likes: 0
From: DFW, TX
Cool, Thanks for the info. Will it work with BMR tubular subframes?
Also, this is the exhasut setup i have except Jet Hots and its 3inch, is the setup your building similar to this?
SEE BELOW
Also, this is the exhasut setup i have except Jet Hots and its 3inch, is the setup your building similar to this?
SEE BELOW
Last edited by 01PewterWS6; Jan 24, 2004 at 09:35 PM.
Originally Posted by z28mccrory
We are in the process of designing our torque arm setup. We are using my car to test it. I have 3 inch true duals so i can assure you it will work great with a true duals
As i said, we are still designing/working the bugs out, but its going to be an extremely strong setup. It will tie in with the subframe connectors and incorporate a drive shaft safely loop.
I will keep you all posted and be sure to post up pictures once we have it complete.
Zack McCrory
PA/Pro Fabrication
As i said, we are still designing/working the bugs out, but its going to be an extremely strong setup. It will tie in with the subframe connectors and incorporate a drive shaft safely loop.
I will keep you all posted and be sure to post up pictures once we have it complete.
Zack McCrory
PA/Pro Fabrication
Originally Posted by z28mccrory
We are in the process of designing our torque arm setup. We are using my car to test it. I have 3 inch true duals so i can assure you it will work great with a true duals
As i said, we are still designing/working the bugs out, but its going to be an extremely strong setup. It will tie in with the subframe connectors and incorporate a drive shaft safely loop.
I will keep you all posted and be sure to post up pictures once we have it complete.
Zack McCrory
PA/Pro Fabrication
As i said, we are still designing/working the bugs out, but its going to be an extremely strong setup. It will tie in with the subframe connectors and incorporate a drive shaft safely loop.
I will keep you all posted and be sure to post up pictures once we have it complete.
Zack McCrory
PA/Pro Fabrication
On The Tree
Joined: Dec 2003
Posts: 134
Likes: 0
I'm building all my own stuff so I won't have these issues....Tq arm, SFC's, and STB will be fabbed up next. I think I'm going to incorporate the DS loop with the SFC's in place of the factory tunnel brace. I'll get pics up when done. Feel free to steal my design.
Originally Posted by WILWAXU
Zack, in the mean time, please contact ynot_dv8@hotmail.com about becomeing a sponsor.
TECH Enthusiast
Joined: Sep 2003
Posts: 568
Likes: 0
From: DFW, TX
Here is my setup except 3inch will it work with this, i would just like a TQ arm that doesnt use the transmission for the front attach point. I dont think i have room to use the tunnel brace either as a front mount point and exhaust will get in the way of tieing into the subframes as well. So keep us posted on what you come up with.
Originally Posted by z28mccrory
I sent the money via paypal to PSJ on Thursday. We look forward to becomming a sponsor of this site. This is by far the best LS1 site around in my opinion.