MikeWS6

Leaning towards the LS6 but the only thing I dont like is the stockish look kind of bothers me. Any opinions on the bbk or something around the same price. (not f.a.s.t)

Mods are in sig.

BruceBufferTA

iTrader: (1)

BBK...no way. Maybe put a sticker on the ls6 that say's "not stock" for that added piece of mind that it's not stock. LS6 wins over the BBK.

99Bluz28

iTrader: (35)

Nothing wrong with the BBK SSI. Yeah it's aluminum, but but so are the heads and block.
I've got the BBK w/ported 85mm TB, and IMO it's a step up from the ls6 w/78mm ported TB. You can also run a 90mm TB by slightly opening up the inlet.

jegten

iTrader: (22)

sent you a pm. let me know. thanks!

MikeWS6

The not stock comment made me laugh. I love how the bbk looks though.

BOBS99SS

iTrader: (2)

Yeah I would go with the ls6 you could always have it powder coated or paint it,for 300 you just can't beat the ls6,if not a ls6 go with a fast a lil more but looks a lot better than the bbk,its up to you though a bbk is better than no intake,

bayer-z28

iTrader: (14)

If I were in your position, I'd do the BBK.

MikeWS6

What would the gains be? 10hp?

MikeWS6

http://texas-speed.com/shop/category...MID=1&catid=73

300??

its 600 where i usually buy my stuff

Detoxx03

iTrader: (14)

LS6 over bbk anyday

MikeWS6

whys that?

Detoxx03

iTrader: (14)

Not a fan of metal intakes

MYSTIC-1SC

iTrader: (14)

You can pick up the LS6 used in good shape for 300-325 all day. Check out the classifieds. If all your considering is this or the BBK, I say go with the LS6. If your concerned about its stock look, smooth and paint it to match your car.

Chronicle

iTrader: (7)

A big reason against a metal intake is that the heat from the block and heads will move to the intake manifold much more easily than with a composite manifold. More heat = less dense air, less power and in some cases more chance of detonation. Used LS6 intakes usually go for around $300, and they're just as good as new ones. And if you are patient you could probably find a used FAST 90 or 92 for around $600-$700.

MikeWS6

With the ls6 can I still use the ls1 stock tb?

MikeWS6

ill prob go for a new one i dont buy used car parts.

joe77

id seriously consider the used ls6, buying new would take away the advantage

*02WS6TURK*

iTrader: (13)

+1
I'm selling my LS6 here in a couple weeks once my FAST 90 goes on, on the 28th. Low miles and in perfect shape.

airforcemanss

iTrader: (23)

that will change one day or it will take a very long time to mod your car.

wantsum410

iTrader: (5)

I just sold my LS6 Intake on here today....I bought it on here used $325 shipped ...& that is what I sold it for .Most of the people on here are very trustworthy & alot of GOOD used parts to save you alot of $ .
For Example ....my 382 LUNATI Rotating Asym ....new=$4299.00...here=$1575.00 to the door
My AFR 205 heads new = $2400.00...here $1500.00 to the door.
New SLP shimmed hp oil pump from member on LS1 Tech $60.00 to the door.
I love this site & ALL the knowledge I have gained & the people share ..there is no way my car would be what it is $ wise & knowledge .Thanks to all who share to help !