adrynalinjunkie

iTrader: (4)

I bought this car with a FAST 90/90.

I just removed the GM MAP and the orange rubber gasket is shot. This must have been causing problems.

Is there a better replacment rubber gromet out there or should I just go to the parts store and then the dealer?

Pocket

iTrader: (22)

GM sells it attached to the sensor. Best bet is a junkyard. Most new MAP sensors use the same grommet, steal one from them

adrynalinjunkie

iTrader: (4)

Even worse GM says it is part of the intake manifold! Would I truck manifold have a usable gasket?

I guess I can go see in the bonyard tomorrow.

O2Form

Look on Fleabay, you can buy a new map with the gasket under 20 dollars.

Pocket

iTrader: (22)

Yes a truck intake will use the gasket. Econo V6's in the JY will be quite a bit easier to come by and most have the new MAP sensors which use that grommet

adrynalinjunkie

iTrader: (4)

Thanks for all the idea's I will check fee bay, better than spending time Saturday afternoon at the nasty azz local bone yard. With all the smart folks.

sjsingle1

iTrader: (1)

you can buy the rubber gasket separate.......ask me how i know

sjsingle1

iTrader: (1)

pn 16194007......got em in 1 day from my dealer

BennyB

iTrader: (12)

Don't mean to bump an old thread, but this thread saved me some money from buying just the seal and not the whole sensor.