LS1121

iTrader: (17)

I'm replacing my exhaust manifolds on my 98 Z28 with manifolds from a 2000 and the tube that goes from the EGR valve to the passenger side exhaust manifold is different, can I just cut the tube and insert some type of rubber hose or will this be a Problem? Thanx for any Help.

99 Blue Bird

iTrader: (3)

y did u switch the manifolds to 2000 instead of 01-02 years? 98 to 00 are all pretty much the same. the 01 02 manifolds are the good ones.

Cold06

iTrader: (9)

get headers you'll thank me later! pacesetter has them for 400

LS1121

iTrader: (17)

I'm replacing my cats with the newer style and the 98-99 manifolds won't adapt to the newer cats. I still need the EGR that is not on the 01-02.

blown97gts

iTrader: (10)

great advice!

LS1121

iTrader: (17)

But..............can anyone answer my Question????????

jsteele90

iTrader: (13)

as long as it is some type of high temp hose i dont think it will be a problem

99 Blue Bird

iTrader: (3)

ok i was just curious. was not sure if you were doing it for a performance upgrade. thats y i mentioned the 01-02 years. before cutting it off try to heat the tube and twist it a tad to be able to bolt it to the manifold.

LS1121

iTrader: (17)

OK Great thans for the suggestions.