New exhaust after Heads and cam install
#1
New exhaust after Heads and cam install
so i just did my heads and cam install (see my build thread) and the dynomax bullet is still way to loud, it is starting to **** off my neighbors, and my wife. so i am in need of a good exhaust that sounds good with a cammed car and longtubes with ORY, that i can start at 5 in the morning and not be heard by the whole block!
here is what my exhaust sounds like now, and the drone at any rpm above 1500 is ridiculous!
http://www.youtube.com/watch?v=cJODBu-b51o
here is what my exhaust sounds like now, and the drone at any rpm above 1500 is ridiculous!
http://www.youtube.com/watch?v=cJODBu-b51o
Last edited by trans_am7935; 04-24-2011 at 10:20 AM.
#4
i am debating between these 2 systems, which one do you guys think will be best for Longtubes, ORY, Heads and cam:
http://www.ws6project.com/user_stor/...roducts_id=626
http://www.ws6project.com/user_stor/...oducts_id=2045
http://www.ws6project.com/user_stor/...roducts_id=626
http://www.ws6project.com/user_stor/...oducts_id=2045
Trending Topics
#8
TECH Fanatic
iTrader: (20)
The tips themselves may make the car sound a little different but as far as the muffler, no. They are the same muffler. The quad tips may make it sound a little quieter than it is already going to be. The cannon tips will some what echo whats coming out of the muffler because they are fairly long and thin metal.
#9
The tips themselves may make the car sound a little different but as far as the muffler, no. They are the same muffler. The quad tips may make it sound a little quieter than it is already going to be. The cannon tips will some what echo whats coming out of the muffler because they are fairly long and thin metal.
#10
TECH Veteran
iTrader: (14)
Join Date: Apr 2005
Location: N. Falmouth MA
Posts: 4,085
Likes: 0
Received 0 Likes
on
0 Posts
Jeez.... Gimme some warning... Didn't know my volume was jacked up on the computer... Gave me a good jump.. Sounds like mine though, but your muffler is about 6" shorter than mine.
But I've seen a Magnaflow system on a TA before and those 4" tips looked AMAZING thu that CETA! LOVED it but I'e also heard it gets a bit loud and raspy with ORY. I can only imagine h/c. Maybe look into a Mufflex/Spintech system. To hell with the flow if you want it quiet, that's what a cutout is for.
But I've seen a Magnaflow system on a TA before and those 4" tips looked AMAZING thu that CETA! LOVED it but I'e also heard it gets a bit loud and raspy with ORY. I can only imagine h/c. Maybe look into a Mufflex/Spintech system. To hell with the flow if you want it quiet, that's what a cutout is for.