Inexpensive Valve covers ??????
Inexpensive Valve covers ?????? Relocated the coil packs and now I am looking for a aftermarket valve cover that is a little taller, looks better and doesn't cost 300.00..... 
i doubt you'll find anything under $300
there isnt much to choose from for the LS1's
the only taller ones i can think of are the Katech's and those fabbed covers made by someone...i think it might have been ARE, cant remember
there isnt much to choose from for the LS1's
the only taller ones i can think of are the Katech's and those fabbed covers made by someone...i think it might have been ARE, cant remember
Originally Posted by redrumss
Relocated the coil packs and now I am looking for a aftermarket valve cover that is a little taller, looks better and doesn't cost 300.00.....
Nasty Performance
E-mail Address(es):
nastyperformance@nastyperformance.com
Business Information:
Phone: 847-458-4858
More Performance has a cool billet one. Try $500: http://www.moreperformanceinc.com/im...alve_Cover.jpg. They have a used pair of sheet metal valve covers for $200: http://www.moreperformanceinc.com/us...s_for_sale.htm.
ARE is suppose to have valve covers, don't know hom much they are. Jantzer can smooth down you existing ones and then chrome/powder coat them: http://community.webshots.com/user/jantzer98ss.
ARE is suppose to have valve covers, don't know hom much they are. Jantzer can smooth down you existing ones and then chrome/powder coat them: http://community.webshots.com/user/jantzer98ss.
Thanks for all of the quick responses..... question since some of the makers are here..... why the beefy valve covers for our cars.... why not a rough texture black set, stamped metal with different logos on them....????? just a question. It seems alot of the valve covers for us right now are one off hand crafted works of art but really expensive for us penny pinchers....
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Once again Country boy you are correct..... not everybody drives a C5R Corvette...... us back woods folk just want some alternative..... and the polished ones from Janzter and LS1 speed are nice but the old PCV problem could be solved with a taller valve cover or at least cut some of the suction down somewhat...
I would kill for a set of sheet metal vlave covers. they just SCREAM "this car means business". but 300.00 or more for a set is just freaking crazy. Guess I'll be stuck with the ugly *** stockers for another 15 or 20 years until the LS1 aftermarket is as big as the SB chev motors.
EDIT: Nick I was on your site looking for the covers and couldnt find anything. Is there any way to get you to email or PM me some pics? I may change my mind about getting a set.
EDIT: Nick I was on your site looking for the covers and couldnt find anything. Is there any way to get you to email or PM me some pics? I may change my mind about getting a set.
The stockers can actually be made to look pretty good.
We smooth the surfaces and powdercoat the stockers for $75. We can remove the coil bosses and fill the holes in with epoxy and powdercoat over the top for $120. Polished valvecovers are $120 for 99+.
We should have a prototype soon of our New Billet Valve covers. They will be approximately 1" taller than stock and more than likely use a breather on top. We will offer them in machined finish, powdercoat, anodized, and fully polished. We are not sure on pricing at this time, but hoping to come in around $225-$325 depending upon options.
We smooth the surfaces and powdercoat the stockers for $75. We can remove the coil bosses and fill the holes in with epoxy and powdercoat over the top for $120. Polished valvecovers are $120 for 99+.
We should have a prototype soon of our New Billet Valve covers. They will be approximately 1" taller than stock and more than likely use a breather on top. We will offer them in machined finish, powdercoat, anodized, and fully polished. We are not sure on pricing at this time, but hoping to come in around $225-$325 depending upon options.
Originally Posted by Nick Agostino
Our covers are $ 350/pair with all hardware and o-ring gaskets one at a time. If we get 5 pairs there will be a discount 
redrumss, did you buy the kit from ThunderRacing?
TECH Apprentice
Joined: Jul 2002
Posts: 310
Likes: 0
From: Shreveport, LA
I need a set of the centerbolt valve covers also. I have been searching for ever and can't find anything. I will be doing a head and cam swap on my car and will need new valve covers.
If anyone has any PM me....
Thanks,
Warren
If anyone has any PM me....
Thanks,
Warren
Launching!
Joined: Jan 2002
Posts: 252
Likes: 0
From: ONTARIO/CANADA
Originally Posted by 70ls1pu
Nick, do you have any pictures, I cant find them on the site.
I will get some pictures and post a link. I know we are not a supporting vendor and don't want to upset anyone
Originally Posted by 1BadMoFo
I'd like to see a pic since I'll be in the market within the next two months...
redrumss, did you buy the kit from ThunderRacing?
redrumss, did you buy the kit from ThunderRacing?
and PPC (advertiser to the right). For everything including Wires it was 95.00...