VandykeT/A

Can anyone tell me if the overall diameter of a 85mm maf is the same as a stock one? Such as where the bellow would go around it. I know 85 is bigger than 75 but Im thinking maybe its just the inside thats bigger thanks.

2000PewterT/A

Not 100% sure, but I believe the 85mm is bigger

fastsspr

iTrader: (49)

That is a good question ???

R6cowboy

iTrader: (3)

I just measured both of them with the micrometer. The outside diameter of the 75mm MAF (from a 2000 Vette) measured 3 5/8" and the 85mm MAF (from 2005 Vette) measured 3 7/8". These were measured from the front of the MAF's. Hope this helps.

joecar

The bellows goes on the rear of the MAF, can you measure the rear diameter...?

Can you remeasure the front in millimeters, please...?

trans_am7935

iTrader: (15)

i had a smooth bellow on my stock 75mm one, and then upgraded to a 85mm GM one, bellow slipped on just fine