Flowmaster Super 44 Single??????
Thread Starter
On The Tree
Joined: Oct 2005
Posts: 174
Likes: 0
From: Yakima, WA
Flowmaster Super 44 Single?????? Looking for someone who has installed a Flowmaster super 44 single muffler...... Either single in/out or single in duel out...... Couldnt find a thread where someone has done it. I would like to put it in like a 80 series and wrap pipe around so I can have true duel exit...... Saw a drawing but cant find where somebody tried... AND no im not doing true duels I dont thing its worth $$.. Bad *** but not worth the $$ to me at this point in my build up.... Thanks for the Help............
You'll have to go with a 3"inlet/2.5" outlets, and a offset inlet will allow the muffler to be positioned better in the stock location. You'll need one FM #9430462 muffler / One Mandrel J-Bend, 2 1/2 in. Diameter, 3 1/2 in. Radius / two 90 Degree, Mandrel Bend, 2 1/2 in. Diameter / Straight Tubing, 2 1/2 in. Diameter, 4 ft. Length..
That should cover all the tubing if you want to run it out to the bumper.
I've ran a FM super 44 before and it sounded great!
That should cover all the tubing if you want to run it out to the bumper.
I've ran a FM super 44 before and it sounded great!
Thread Starter
On The Tree
Joined: Oct 2005
Posts: 174
Likes: 0
From: Yakima, WA
2.5? You'll have to go with a 3"inlet/2.5" outlets, and a offset inlet will allow the muffler to be positioned better in the stock location. You'll need one FM #9430462 muffler / One Mandrel J-Bend, 2 1/2 in. Diameter, 3 1/2 in. Radius / two 90 Degree, Mandrel Bend, 2 1/2 in. Diameter / Straight Tubing, 2 1/2 in. Diameter, 4 ft. Length..
That should cover all the tubing if you want to run it out to the bumper.
I've ran a FM super 44 before and it sounded great!
That should cover all the tubing if you want to run it out to the bumper.
I've ran a FM super 44 before and it sounded great!
Thanks
Thread Starter
On The Tree
Joined: Oct 2005
Posts: 174
Likes: 0
From: Yakima, WA
Thanks Bro....I'll do it than...someones gotta put a super 44 single sound clip on here...... Everybody talks mad **** about flowmaster on here, I get the flow of the 80 series problem but I had one on my last Z with Pace Setter long tubes and no cat....Everyone always told me how bad *** it sounded. It was Loud as ****....I love that flowmaster sound so this should be the best of both worlds with no cross flow problems!
FYI, the center inlet fm s44 (#9430452) will offer better flow than the offset inlet model I posted earlier and still fit good in the stock muffler location. You might want to go with this one for maximum flow from a 3" inlet FM muffler.
Last edited by 99Bluz28; Sep 24, 2011 at 11:05 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
